Caterpillar 910
Browse All Caterpillar or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 8.01 ft in (2440 mm) |
| Bucket Capacity - Heaped | 1.31 yd3 (1 m3) |
| Bucket Width | 7.06 ft in (2150 mm) |
| Breakout Force | 9320 lb (41.46 kN) |
Dimensions
| Ground Clearance | 1.25 ft in (381 mm) |
| Length With Bucket On Ground | 17.92 ft in (5460 mm) |
| Width Over Tires | 6.67 ft in (2030 mm) |
| Height To Top Of Cab | 9.91 ft in (3020 mm) |
| Wheelbase | 7.68 ft in (2340 mm) |
| Hinge Pin - Max Height | 10.14 ft in (3090 mm) |
| Reach At Max Lift And Dump | 2.83 ft in (860 mm) |
Engine
| Number Of Cylinders | 4 |
| Engine Make | 2236 |
| Engine Model | 3204 |
| Net Power | 65 hp (48.5 kw) |
| Power Measured @ | 2400 rpm |
| Displacement | 317.4 cu in (5.2 L) |
Operational
| Operating Weight | 14210 lb (6445.6 kg) |
| Fuel Capacity | 29.9 gal (113 L) |
| Hydraulic System Fluid Capacity | 15.1 gal (57 L) |
| Engine Oil Fluid Capacity | 3 gal (11 L) |
| Cooling System Fluid Capacity | 6.7 gal (25 L) |
| Transmission Fluid Capacity | 6.1 gal (23 L) |
| Front Axle/Diff Fluid Capacity | 4 gal (15 L) |
| Rear Axle/Diff Fluid Capacity | 4 gal (15 L) |
| Static Tipping Weight | 9876.8 lb (4480 kg) |
| Turning Radius | 15.5 ft in (4720 mm) |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 40 amps |
| Rear Axle Oscillation | 22 degrees |
| Tire Size | 15.5 x 25.8 PR |
Transmission
| Transmission Type | Planetary power shift |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 1 |
| Max Speed - Forward | 15 mph (24.2 km/h) |
| Max Speed - Reverse | 6.6 mph (10.7 km/h) |
Hydraulic System
| Relief Valve Setting | 2500 psi (17236.9 kPa) |
| Raise Time | 6 sec |
| Dump Time | 1.3 sec |
| Lower Time | 3.5 sec |
| Pump Type | double section gear |
