Caterpillar 910E
Browse All Caterpillar or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 8.46 ft in (2577 mm) |
| Bucket Capacity - Heaped | 1.31 yd3 (1 m3) |
| Bucket Capacity - Struck | 1.1 yd3 (0.84 m3) |
| Bucket Width | 7.62 ft in (2320 mm) |
| Breakout Force | 16626 lb (73.96 kN) |
Dimensions
| Ground Clearance | 1.13 ft in (343.4 mm) |
| Length With Bucket On Ground | 19.59 ft in (5970 mm) |
| Width Over Tires | 7.06 ft in (2150 mm) |
| Height To Top Of Cab | 9.83 ft in (2996 mm) |
| Wheelbase | 7.67 ft in (2337 mm) |
| Hinge Pin - Max Height | 11 ft in (3350 mm) |
| Reach At Max Lift And Dump | 3.31 ft in (1006 mm) |
Engine
| Number Of Cylinders | 4 |
| Engine Make | 2236 |
| Engine Model | 3114 |
| Net Power | 75 hp (56 kw) |
| Gross Power | 81 hp (60.5 kw) |
| Power Measured @ | 2400 rpm |
| Displacement | 268.6 cu in (4.4 L) |
| Aspiration | turbocharged |
Operational
| Operating Weight | 15979.2 lb (7248 kg) |
| Fuel Capacity | 25.7 gal (97 L) |
| Hydraulic System Fluid Capacity | 18.5 gal (70 L) |
| Engine Oil Fluid Capacity | 3 gal (11 L) |
| Cooling System Fluid Capacity | 8 gal (30 L) |
| Transmission Fluid Capacity | 6.1 gal (23 L) |
| Front Axle/Diff Fluid Capacity | 4.8 gal (18 L) |
| Rear Axle/Diff Fluid Capacity | 4.8 gal (18 L) |
| Static Tipping Weight | 10491.8 lb (4759 kg) |
| Turning Radius | 15.8 ft in (4811.5 mm) |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 55 amps |
| Rear Axle Oscillation | 22 degrees |
| Tire Size | 15.5x25 8 PR(L-2) |
Transmission
| Transmission Type | powershift |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 22.4 mph (36 km/h) |
| Max Speed - Reverse | 15 mph (24 km/h) |
Hydraulic System
| Relief Valve Setting | 2204 psi (15196.1 kPa) |
| Pump Flow Capacity | 29.6 gal/min (112 L/min) |
| Raise Time | 5.3 sec |
| Dump Time | 1.3 sec |
| Lower Time | 3.2 sec |
