Caterpillar 854K
Browse All Caterpillar or Wheel Dozer Models
Contents:
Dimensions
| Length With Blade On Ground | 43.98 ft in (13405 mm) |
| Ground Clearance | 2.27 ft in (691 mm) |
| Height To Top Of Cab | 18.34 ft in (5590 mm) |
| Wheelbase | 19.33 ft in (5890 mm) |
Dimensions (Approximate)
| Ground Clearance | 2.25 ft in (0.06 m) |
| Length - With Blade On Ground | 44 ft in (13.42 m) |
| Wheel Base | 19.25 ft in (5.87 m) |
| Height - Top Of Rops | 18.25 ft in (5.57 m) |
| Centerline Of Rear Axle To Edge Of Bumper | 13.75 ft in (4.2 m) |
| Height - Top Of Exhaust Pipe | 17.18 ft in (5.24 m) |
| Height - Top Of Hood | 13 ft in (3.97 m) |
| Centerline Of Front Axle To Hitch | 9.67 ft in (2.95 m) |
Engine
| Number Of Cylinders | 12 |
| Engine Make | 2236 |
| Engine Model | C32 Acert |
| Gross Power | 907 hp (676.4 kw) |
| Net Power | 800.6 hp (597 kw) |
| Power Measured @ | 1750 rpm |
| Rated Speed | 1750 rpm |
| Net Torque | 3129 lb ft (4242.4 Nm) |
| Torque Rise | 30 % |
| Displacement | 1958.9 cu in (32.1 L) |
| Aspiration | turbocharged |
| Bore | 5.7 in (144.8 mm) |
| Stroke | 6.4 in (162.6 mm) |
| Engine Model | Cat C32 ACERT |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. |
| Note (2) | Net torque rise meets SAE J139. |
| Note (3) | No engine derating required up to 3050 m (10,000 ft) altitude. |
| Peak Torque - 1,200 Rpm | 3139 lb ft (4256 Nm) |
| Emissions (U.S. Epa Tier 4 Final): Gross Power - Sae J1995 | 900 hp (671.2 kw) |
| Emissions (Tier 2 Equivalent): Gross Power - Sae J1995 | 907 hp (676.4 kw) |
| Emissions (U.S. Epa Tier 4 Final): Net Power Iso - 9249 | 814 hp (607 kw) |
| Emissions (Tier 2 Equivalent): Net Power Iso - 9249 | 814 hp (607 kw) |
Operational
| Operating Weight | 217128.9 lb (98488 kg) |
| Fuel Capacity | 412.7 gal (1562 L) |
| Cooling System Fluid Capacity | 52.9 gal (200 L) |
| Engine Oil Capacity | 31.8 gal (120 L) |
| Transmission Fluid Capacity | 44.7 gal (169 L) |
| Front Diff Fluid Capacity | 97.5 gal (369 L) |
| Rear Diff Fluid Capacity | 90.4 gal (342 L) |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 150 amps |
| Tire Size | 45/65-R45 |
Transmission
| Transmission Type | Cat Planetary Power Shift |
| Transmission Type | Planetary power shift |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 13.2 mph (21.2 km/h) |
| Max Speed - Reverse | 14.7 mph (23.5 km/h) |
| Note | Travel speeds based on 45/65-45 L-5 46 ply tires. |
| Direct Drive - Forward 3 | 14.2 mph (22.9 km/h) |
| Direct Drive - Reverse 3 | 15.6 mph (25.2 km/h) |
| Direct Drive - Forward 2 | 8.1 mph (13.1 km/h) |
| Direct Drive - Reverse 2 | 8.9 mph (14.4 km/h) |
Steering
| Total Steering Angle | 86 degrees |
Transmission
| Converter Drive - Forward 3 | 13.2 mph (21.3 km/h) |
| Converter Drive - Reverse 3 | 14.6 mph (23.5 km/h) |
| Direct Drive - Forward 1 | Lock-up disabled |
| Converter Drive - Forward 1 | 4.4 mph (7.1 km/h) |
| Converter Drive - Forward 2 | 7.7 mph (12.4 km/h) |
| Direct Drive - Reverse 1 | 5 mph (8.1 km/h) |
| Converter Drive - Reverse 1 | 4.8 mph (7.8 km/h) |
| Converter Drive - Reverse 2 | 8.4 mph (13.6 km/h) |
Steering
| Relief Valve Setting | 5004 psi |
| Hydraulic Output At 1,850 Rpm And 6900 Kpa (1,000 Psi) | 124 gal/min |
| Minimum Turning Radius | 31 ft in (9.5 m) |
Weights
| Operating Weight | 224254 lb (101720 kg) |
Blade
| Blade Capacity | 33.3 yd3 (25.4 m3) |
| Blade Width | 20.8 ft in (6321 mm) |
| Blade Height | 7.2 ft in (2179 mm) |
Axles
| Front | Fixed |
| Rear | Oscillating at 10 degrees |
| Maximum Single-Wheel Rise And Fall | 22.6 in (574.1 mm) |
Brakes
| Brakes | Meets ISO 3540:2011 |
Service Refill Capacities
| Cooling System | 53 gal (200.7 L) |
| Crankcase | 32 gal (121.2 L) |
| Fuel Tank - Standard | 413 gal (1563.4 L) |
| Transmission | 45 gal (170.4 L) |
| Differential - Final Drives - Front | 98 gal (371 L) |
| Differential - Final Drives - Rear | 90 gal (340.7 L) |
| Hydraulic System - Implement And Brakes - Tank Only | 81 gal (306.7 L) |
| Hydraulic System - Steering And Engine Cooling Fan - Tank Only | 77 gal (291.5 L) |
Hydraulic System - Lift/Tilt
| Cylinders, Double Acting - Lift, Bore And Stroke | 177 mm 1760 mm (0.58 ft 5.8 ft) |
| Cylinder, Double Acting - Tilt And Tip, Bore And Stroke | 267 mm 286 mm (0.88 ft 0.94 ft) |
| Output At 1,850 Rpm And 6900 Kpa (1,000 Psi) | 161 gal/min |
| Relief Valve Setting - Lift (Large Pump) | 3289 psi |
| Relief Valve Setting - Tilt (Small Pump) | 3560 psi |
Cab
| Air Conditioning | Standard air conditioning system contains environmentally friendly R134a refrigerant |
| Rops | ROPS meets SAE J1040 MAY94, ISO 3471:2008 and ISO 3471:1994 criteria. |
| Fops | FOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria. |
| Cab - Rops/Fops (2) | SAE J1040 MAY94, ISO 3471:2008, ISO 3471:2005 |
| Cab - Rops/Fops (1) | Cat cab with separate ROPS/FOPS is standard in North America, Europe and Japan. |
| Sound Performance (4) | The operator sound exposure Leq measured according to work cycle procedures specified in ANSI/SAE J1166 FEB08 is 71 dB(A). |
| Sound Performance (3) | Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. |
| Sound Performance (2) | The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) is 87 dB(A). |
| Sound Performance (1) | The dynamic operator sound pressure level is 71 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. |
Blades
| Blade Capacities | 25 to 45 m (33 to 58 yd) |
Model 854k (Tier 2)
| Serial Number Prefix | RM6 |
Model 854k (Tier 4)
| Serial Number Prefix | KK6 |
