Caterpillar 814F
Browse All Caterpillar or Wheel Dozer Models
Contents:
Dimensions
| Length With Blade On Ground | 22.58 ft in (6881 mm) |
| Width Over Tires | 9.19 ft in (2800 mm) |
| Ground Clearance | 1.2 ft in (365.76 mm) |
| Height To Top Of Cab | 10.92 ft in (3326 mm) |
| Wheelbase | 11 ft in (3350 mm) |
| Centerline Of Rear Axle To Edge Of Bumper | 6.14 ft in (1.88 m) |
| Height - Top Of Hood | 93.48 in (2374.4 mm) |
| Length - With Blade On Ground | 22.58 ft in (6.89 m) |
| Wheel Base | 11 ft in (3.36 m) |
| Height - Top Of Exhaust Pipe | 130.09 in (3304.04 mm) |
| Centerline Of Rear Axle To Hitch | 66 in (1676.4 mm) |
| Height - Bottom Of Ladder | 1.45 ft in (0.45 m) |
| Ground Clearance - Bumper | 2.46 ft in (0.75 m) |
| Height - Top Of Cab | 10.91 ft in (3.33 m) |
Operating Specifications
| Ground Clearance | 1.47 ft in (0.04 m) |
Engine
| Number Of Cylinders | 6 |
| Engine Make | 2236 |
| Engine Model | 3176C ATAAC |
| Gross Power | 254 hp (189.5 kw) |
| Net Power | 240 hp (179 kw) |
| Power Measured @ | 2100 rpm |
| Torque Rise | 45 % |
| Displacement | 628.6 cu in (10.3 L) |
| Bore | 5 in (125 mm) |
| Stroke | 5.6 in (140 mm) |
| Net Power - Iso 9249 | 240 hp (179 kw) |
| Engine Model | Cat 3176C ATAAC |
| Flywheel Power | 240 hp (179 kw) |
| Net Power - Eec 80/1269 | 240 hp (179 kw) |
| Net Power - Sae J1349 (Jan90) | 240 hp (179 kw) |
Operational
| Operating Weight | 47869 lb (21713 kg) |
| Fuel Capacity | 117.9 gal (446 L) |
| Cooling System Fluid Capacity | 14.6 gal (55 L) |
| Engine Oil Capacity | 9 gal (34 L) |
| Transmission Fluid Capacity | 13.3 gal (50 L) |
| Hydraulic System Fluid Capacity | 23.3 gal (88 L) |
| Front Diff Fluid Capacity | 17.2 gal (65 L) |
| Rear Diff Fluid Capacity | 17.2 gal (65 L) |
| Steering Angle | 30 degrees |
| Axle Oscillation | 12 degrees |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 70 amps |
| Tire Size | 23.5-25 12PR |
Transmission
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 4 |
| Max Speed - Forward | 19.3 mph (30.9 km/h) |
| Max Speed - Reverse | 21.9 mph (35.1 km/h) |
| Forward - 1 | 3.6 mph (5.8 km/h) |
| Forward - 2 | 6.3 mph (10.2 km/h) |
| Forward - 3 | 10.9 mph (17.6 km/h) |
| Forward - 4 | 19.2 mph (30.9 km/h) |
| Reverse - 1 | 4.1 mph (6.6 km/h) |
| Reverse - 2 | 7.1 mph (11.5 km/h) |
| Reverse - 3 | 12.5 mph (20.2 km/h) |
| Reverse - 4 | 21.8 mph (35.1 km/h) |
Steering
| Turning Radius - With Straight Blade | 15.6 ft in (4.8 m) |
Weights
| Operating Weight | 47877 lb (21716.7 kg) |
Tires
| Standard Tire Size | 23.5-25,12PR |
| Tires | 4 options available |
Blade
| Blade Capacity | 3.5 yd3 (2.7 m3) |
Hydraulic System
| Relief Valve Setting | 2255 psi |
Blade
| Blade Width | 11.8 ft in (3596 mm) |
| Blade Height | 3.7 ft in (1110 mm) |
Axles
| Front | Fixed |
| Rear | Oscillating 12 degrees |
| Maximum Single-Wheel Rise And Fall | 18.4 in (467.2 mm) |
Hydraulic System
| Lift Cylinder, Bore And Stroke | 120.65 mm x 913.9 mm 4.74 in x 35.98 in |
| Steering Cylinder, Bore And Stroke | 101.6 mm x 597 mm 3.99 in x 23.5 in |
Brakes
| Brakes | Meet OSHA regulations |
Service Refill Capacities
| Cooling System | 14.5 gal (54.9 L) |
| Crankcase | 9 gal (34.1 L) |
| Hydraulic Tank | 23.2 gal (87.9 L) |
| Fuel Tank - Standard | 117.8 gal (446 L) |
| Transmission | 13.2 gal (50 L) |
| Differential - Final Drives - Front | 17.1 gal (64.8 L) |
| Differential - Final Drives - Rear | 17.1 gal (64.8 L) |
Cab
| Rops/Fops | Meets SAE and ISO standards |
Sound Performance
| Standards | Meet required standards |
Blade Specifications
| Straight Blade - Capacity | 3.5 yd3 (2.7 m3) |
| Blade Capacities | 2.66 m3 3.49 yd3 |
| Moldboard - Length | 11.8 ft in (3.6 m) |
| Blade Tip Angle - Total | 51.9 degrees |
| Blade Tip Angle - Forward | 10 degrees |
| Blade Tip Angle - Back | 4.5 degrees |
| Blade Tilt Angle - Right | 4.5 degrees |
| Blade Tilt Angle - Left | 8 degrees |
| Maximum Lift Above Ground | 2.4 ft in (0.8 m) |
| Straight Blade - Overall Width | 11.8 ft in (3.6 m) |
| Straight Blade - Height | 3.6 ft in (1.1 m) |
| Straight Blade - Digging Depth | 1.8 ft in (0.6 m) |
| Straight Blade - Ground Clearance | 2.4 ft in (0.8 m) |
| Straight Blade - Maximum Tilt | 2.6 ft in (0.8 m) |
