Mitsubishi MG130-E
Browse All Mitsubishi or Motor Grader Models
Contents:
Dimensions
| Overall Length | 22.68 ft in (6910 mm) |
| Width Over Tires | 7.03 ft in (2140 mm) |
| Wheelbase | 16.08 ft in (4900 mm) |
| Blade Base | 7.01 ft in (2135 mm) |
| Height To Top Of Isomount Cab | 9.88 ft in (3010 mm) |
Engine
| Number Of Cylinders | 4 |
| Engine Make | 2251 |
| Engine Model | SK4-T |
| Power Measured @ | 2300 rpm |
| Max Power | 95 hp (70.9 kw) |
| Displacement | 259.3 cu in (4.3 L) |
Operational
| Hydraulic System Fluid Capacity | 17.7 gal (67 L) |
| Std Operation Weight - Total | 22178.6 lb (10060 kg) |
| Oil System Fluid Capacity | 3.2 gal (12 L) |
| Fuel Capacity | 30.4 gal (115 L) |
| Transmission Fluid Capacity | 6.1 gal (23 L) |
| Circle Gearbox Fluid Capacity | 1 gal (3.5 L) |
| Tandem Case Fluid Capacity (Each) | 6.9 gal (26 L) |
| Tire Size | 10.00-20-12 |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 30 amps |
Steering
| Articulation Angle | 26 degrees |
Transmission
| Transmission Type | planetary |
| Number Of Gears - Forward | 6 |
| Number Of Gears - Reverse | 6 |
| Max Speed - Forward | 20.3 mph (32.6 km/h) |
| Max Speed - Reverse | 20.7 mph (33.2 km/h) |
Front Axle
| Wheel Lean | 20 degrees |
| Oscillation - Total | 30 degrees |
| Ground Clearance | 1.6 ft in (480 mm) |
Moldboard
| Moldboard Width | 10.2 ft in (3100 mm) |
| Moldboard Height | 24.1 in (610 mm) |
| Moldboard Thickness | 0.8 in (19 mm) |
Hydraulic System
| Pump Type | tandem gear |
| Pump Flow | 28.1 gal/min (106 L/min) |
| Relief Valve Pressure | 2.5 psi (17.2 kPa) |
Circle
| Rotation | 360 degrees |
| Shift Left | 57.9 in (1470 mm) |
| Shift Right | 48.5 in (1230 mm) |
| Max Lift Above Ground | 15.8 in (400 mm) |
| Blade Tip Angle - Front | 40 degrees |
| Blade Tip Angle - Rear | 5 degrees |
