Mitsubishi MG230-E
Browse All Mitsubishi or Motor Grader Models
Contents:
Dimensions
| Overall Length | 24.04 ft in (7325 mm) |
| Width Over Tires | 7.03 ft in (2140 mm) |
| Wheelbase | 17.39 ft in (5300 mm) |
| Blade Base | 7.17 ft in (2185 mm) |
| Height To Top Of Isomount Cab | 9.95 ft in (3030 mm) |
Engine
| Number Of Cylinders | 6 |
| Engine Make | 2251 |
| Engine Model | 6D34-TE1 |
| Power Measured @ | 2500 rpm |
| Max Power | 115 hp (85.8 kw) |
| Displacement | 357.7 cu in (5.9 L) |
Operational
| Hydraulic System Fluid Capacity | 29.1 gal (110 L) |
| Std Operation Weight - Total | 24383.2 lb (11060 kg) |
| Oil System Fluid Capacity | 4.3 gal (16 L) |
| Fuel Capacity | 55.5 gal (210 L) |
| Transmission Fluid Capacity | 6.1 gal (23 L) |
| Circle Gearbox Fluid Capacity | 1 gal (3.5 L) |
| Tandem Case Fluid Capacity (Each) | 7.4 gal (28 L) |
| Tire Size | 13.00-24-12 |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 40 amps |
Steering
| Articulation Angle | 26 degrees |
Transmission
| Transmission Type | planetary |
| Number Of Gears - Forward | 6 |
| Number Of Gears - Reverse | 6 |
| Max Speed - Forward | 20.3 mph (32.6 km/h) |
| Max Speed - Reverse | 20.7 mph (33.2 km/h) |
Front Axle
| Wheel Lean | 20 degrees |
| Oscillation - Total | 30 degrees |
| Ground Clearance | 1.6 ft in (480 mm) |
Moldboard
| Moldboard Width | 10.2 ft in (3100 mm) |
| Moldboard Height | 24.1 in (610 mm) |
| Moldboard Thickness | 0.8 in (19 mm) |
Hydraulic System
| Pump Type | tandem gear |
| Pump Flow | 29.1 gal/min (110 L/min) |
| Relief Valve Pressure | 2.5 psi (17.2 kPa) |
Circle
| Rotation | 360 degrees |
| Shift Left | 65 in (1650 mm) |
| Shift Right | 66.2 in (1680 mm) |
| Max Lift Above Ground | 17 in (430 mm) |
| Blade Tip Angle - Front | 40 degrees |
| Blade Tip Angle - Rear | 5 degrees |
