Mitsubishi MG530-E
Browse All Mitsubishi or Motor Grader Models
Contents:
Dimensions
| Overall Length | 28.7 ft in (8745 mm) |
| Width Over Tires | 8.75 ft in (2665 mm) |
| Wheelbase | 20.51 ft in (6250 mm) |
| Blade Base | 8.76 ft in (2670 mm) |
| Height To Top Of Isomount Cab | 10.31 ft in (3140 mm) |
Engine
| Number Of Cylinders | 6 |
| Engine Make | 2251 |
| Engine Model | 6D22-T |
| Power Measured @ | 2000 rpm |
| Max Power | 185 hp (138 kw) |
| Displacement | 680.4 cu in (11.2 L) |
Operational
| Hydraulic System Fluid Capacity | 17.7 gal (67 L) |
| Std Operation Weight - Total | 40179.3 lb (18225 kg) |
| Oil System Fluid Capacity | 6.9 gal (26 L) |
| Fuel Capacity | 72.7 gal (275 L) |
| Transmission Fluid Capacity | 8.5 gal (32 L) |
| Circle Gearbox Fluid Capacity | 1 gal (3.5 L) |
| Tandem Case Fluid Capacity (Each) | 22.5 gal (85 L) |
| Tire Size | 17.50-25-12 |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 40 amps |
Steering
| Articulation Angle | 26 degrees |
Transmission
| Transmission Type | planetary |
| Number Of Gears - Forward | 6 |
| Number Of Gears - Reverse | 6 |
| Max Speed - Forward | 29 mph (46.6 km/h) |
| Max Speed - Reverse | 29.6 mph (47.5 km/h) |
Front Axle
| Wheel Lean | 20 degrees |
| Oscillation - Total | 30 degrees |
| Ground Clearance | 2.2 ft in (652 mm) |
Moldboard
| Moldboard Height | 28.4 in (720 mm) |
| Moldboard Thickness | 0.9 in (22 mm) |
Hydraulic System
| Pump Type | tandem gear |
| Pump Flow | 26.5 gal/min (100 L/min) |
| Relief Valve Pressure | 2.5 psi (17.2 kPa) |
Circle
| Rotation | 360 degrees |
| Shift Left | 91.6 in (2325 mm) |
| Shift Right | 86.5 in (2195 mm) |
| Max Lift Above Ground | 18.2 in (460 mm) |
| Blade Tip Angle - Front | 40 degrees |
| Blade Tip Angle - Rear | 9 degrees |
