Hitachi ZX130-6
Browse All Hitachi or Hydraulic Excavator Models
Contents:
Boom/Stick Option (Hex) 1
| Max Cutting Height | 28.3 ft in (8625.84 mm) |
| Max Reach Along Ground | 26.11 ft in (7958.33 mm) |
| Max Vertical Wall Digging Depth | 16.61 ft in (5059.68 mm) |
| Max Digging Depth | 18.3 ft in (5577.84 mm) |
| Arm Digging Force - Iso | 15476 lb (68.85 kN) |
| Arm Digging Force - Sae | 14991 lb (66.69 kN) |
| Bucket Digging Force - Iso | 23435 lb (104.25 kN) |
| Bucket Digging Force - Sae | 20525 lb (91.3 kN) |
| Max.Dumping Height | 20.4 ft in (6217.92 mm) |
Dimensions
| Ground Clearance | 1.35 ft in (410 mm) |
| Tail Swing Radius | 7.2 ft in (2194.56 mm) |
| Track Gauge | 6.6 ft in (2011.68 mm) |
| Counterweight Clearance | 2.76 ft in (840 mm) |
| Overall Length | 25.4 ft in (7741.92 mm) |
| Overall Width | 10.6 in (269 mm) |
| Overall Height | 9 ft in (2743.2 mm) |
| Center To Center – Idler To Sprocket | 9.5 ft in (2895.6 mm) |
| Cab Height | 10.99 in (279 mm) |
| Undercarriage Overall Length | 11.9 ft in (3627.12 mm) |
Undercarriage
| Drawbar Pull | 24729 lb (110.01 kN) |
| Track Adjustment | Hydraulic |
| Number Of Track Rollers Per Side | 7 |
| Number Of Carrier Rollers Per Side | 1 |
Engine
| Emission Tier Level | EPA Final Tier 4 |
| Battery | 2 |
| Number Of Cylinders | 4 |
| Off-Level Capacity | 70 % |
| Engine Model | 4JJ1 |
| Net Power | 101 hp (75.4 kw) |
| Power Measured @ | 2000 rpm |
| Aspiration | Turbocharged and charged air cooled |
| Displacement | 183.1 cu in (3 L) |
| Alternator | 50 amps |
Operational
| Propel Gearbox (Each) | 1.1 gal (4 L) |
| Swing Gearbox | 0.9 gal (3.2 L) |
| Fuel Capacity | 75.3 gal (285 L) |
| Cooling System Fluid Capacity | 5.6 gal (21 L) |
| Engine Oil Capacity | 4.5 gal (17 L) |
| Hydraulic System Relief Valve Pressure | 26.9 psi (185 kPa) |
| Hydraulic Pump Flow Capacity | 18.3 gal/min (69 L/min) |
Performance
| Travel Speed Low | 2.1 mph (3.3 km/h) |
| Travel Speed - High | 3.5 mph (5.5 km/h) |
Swing Mechanism
| Swing Speed | 13.3 rpm |
| Swing Torque | 25077.2 lb ft (34000 Nm) |
Blade
| Transport Height | 9.5 ft in (2895.6 mm) |
| Blade Lift Height | 20.6 in (523 mm) |
| Blade Cut Below Grade | 19.3 in (488 mm) |
| Blade Lift Angle | 27 degrees |
Hydraulic System
| Pilot Pump - Maximum Flow | 27.8 gal/min (105 L/min) |
| Max. Pressure Setting | 570 psi (3930.1 kPa) |
| Implement - Operating Pressure | 4980 psi (34335.9 kPa) |
| Travel - Operating Pressure | 4980 psi (34335.9 kPa) |
| Swing - Operating Pressure | 4685 psi (32302 kPa) |
| Power Boost - Operating Pressure | 5265 psi (36300.9 kPa) |
| Controls | Pilot levers, short-stroke, low-effort hydraulic pilot controls with shutoff lever |
Blade
| Blade Length | 8.3 ft in (2.6 m) |
| Blade Width | 8.5 ft in (2590 mm) |
| Blade Height | 20.6 in (523 mm) |
