Liebherr L580 2plus2
Browse All Liebherr or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 10.83 ft in (3300 mm) |
| Bucket Capacity - Heaped | 6.54 yd3 (5 m3) |
| Bucket Width | 10.83 ft in (3300 mm) |
| Breakout Force | 39341.57 lb (175 kN) |
Dimensions
| Ground Clearance | 1.81 ft in (550 mm) |
| Length With Bucket On Ground | 29.53 ft in (9000 mm) |
| Height To Top Of Cab | 11.62 ft in (3540 mm) |
| Wheelbase | 11.72 ft in (3570 mm) |
| Hinge Pin - Max Height | 14.97 ft in (4560 mm) |
| Reach At Max Lift And Dump | 3.78 ft in (1150 mm) |
Engine
| Number Of Cylinders | 6 |
| Engine Make | 2245 |
| Engine Model | D 926 TI-E A2 |
| Gross Power | 265 hp (197.7 kw) |
| Power Measured @ | 2000 rpm |
| Max Torque | 947.8 lb ft (1285 Nm) |
| Torque Measured @ | 1200 rpm |
| Aspiration | turbo-charged with intercooler |
Operational
| Operating Weight | 54542.4 lb (24740 kg) |
| Fuel Capacity | 87.2 gal (330 L) |
| Hydraulic System Fluid Capacity | 63.5 gal (240 L) |
| Engine Oil Fluid Capacity | 6.3 gal (23.5 L) |
| Front Axle/Diff Fluid Capacity | 15.4 gal (58 L) |
| Rear Axle/Diff Fluid Capacity | 13.3 gal (50 L) |
| Static Tipping Weight | 44665.7 lb (20260 kg) |
| Turning Radius | 23.8 ft in (7250 mm) |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 55 amps |
| Rear Axle Oscillation | 26 degrees |
| Tire Size | 26.5R25 |
Transmission
| Transmission Type | hydrostatic 2plus2 |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 24.9 mph (40 km/h) |
| Max Speed - Reverse | 24.9 mph (40 km/h) |
Hydraulic System
| Relief Valve Setting | 5076.4 psi (35000 kPa) |
| Pump Flow Capacity | 76.7 gal/min (290 L/min) |
| Raise Time | 5.5 sec |
| Dump Time | 2 sec |
| Lower Time | 3.5 sec |
| Pump Type | Load-sensing variable axial piston pump with output control and pressure cut-off |
