Caterpillar 966H
Browse All Caterpillar or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 10.17 ft in (3086 mm) |
| Breakout Force | 42300 lb (188 kN) |
| Bucket Width | 10.58 ft in (3220 mm) |
| Bucket Capacity - Heaped | 5.5 yd3 (4.25 m3) |
| Bucket Capacity - Struck | 4.74 yd3 (3.62 m3) |
Dimensions
| Ground Clearance | 1.63 ft in (496.83 mm) |
| Length With Bucket On Ground | 29.08 ft in (8855 mm) |
| Width Over Tires | 9.67 ft in (2956 mm) |
| Height To Top Of Cab | 11.83 ft in (3600 mm) |
| Wheelbase | 11.32 ft in (3450 mm) |
| Hinge Pin - Max Height | 13.86 ft in (4224 mm) |
| Reach At Max Lift And Dump | 4.25 ft in (1294 mm) |
| Height - Top Of Exhaust Pipe | 139.81 in (3550.92 mm) |
| Centerline Of Rear Axle To Hitch | 67.92 in (1725.17 mm) |
| Centerline Rear Axle To Edge Of Counterweight | 8.07 ft in (2.46 m) |
| B-Pin Height - Standard | 13.86 ft in (4.23 m) |
| Height - Top Of Hood | 105.48 in (2679.2 mm) |
| Height - Top Of Rops | 11.81 ft in (3.6 m) |
| Wheel Base | 11.32 ft in (3.46 m) |
Engine
| Number Of Cylinders | 6 |
| Engine Make | 2236 |
| Engine Model | C11 ACERT |
| Net Power | 262 hp (195 kw) |
| Gross Power | 286 hp (213 kw) |
| Power Measured @ | 1800 rpm |
| Max Torque | 896 lb ft (1215 Nm) |
| Displacement | 677 cu in (11.1 L) |
| Torque Measured @ | 1400 rpm |
| Aspiration | Turbocharged |
| Torque Rise | 38 % |
| Bore | 5.2 in (130.1 mm) |
| Stroke | 5.6 in (140 mm) |
| Net Power - Iso 9249 | 262 hp (195.4 kw) |
| Net Power - Sae J1349 | 259 hp (193.2 kw) |
| Net Power - 80/1269/Eec | 262 hp (195.4 kw) |
| Gross Power - Sae J1995 | 286 hp (213.3 kw) |
| Engine Model | Cat? C11 ACERT? |
| Flywheel Power | 262 hp (195.4 kw) |
| Peak Torque - 1,400 Rpm - Net | 896 lb ft (1214.9 Nm) |
Operational
| Operating Weight | 52254 lb (23698 kg) |
| Fuel Capacity | 100.4 gal (380 L) |
| Hydraulic System Fluid Capacity | 29 gal (110 L) |
| Engine Oil Fluid Capacity | 9.3 gal (35 L) |
| Cooling System Fluid Capacity | 10.3 gal (39 L) |
| Transmission Fluid Capacity | 11.7 gal (44 L) |
| Front Axle/Diff Fluid Capacity | 16.9 gal (64 L) |
| Rear Axle/Diff Fluid Capacity | 16.9 gal (64 L) |
| Static Tipping Weight | 38354 lb (17394 kg) |
| Turning Radius | 24.2 ft in (7367 mm) |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 80 amps |
| Rear Axle Oscillation | 26 degrees |
| Tire Size | 26.5-25 |
Transmission
| Transmission Type | Powershift |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 4 |
| Max Speed - Forward | 23.2 mph (37.4 km/h) |
| Max Speed - Reverse | 23.2 mph (37.4 km/h) |
| Forward - 1 | 4.2 mph (6.8 km/h) |
| Forward - 2 | 7.8 mph (12.6 km/h) |
| Forward - 3 | 13.7 mph (22.1 km/h) |
| Forward - 4 | 23.2 mph (37.4 km/h) |
| Reverse - 1 | 4.6 mph (7.5 km/h) |
| Reverse - 2 | 8.6 mph (13.9 km/h) |
| Reverse - 3 | 15.1 mph (24.4 km/h) |
| Reverse - 4 | 23.2 mph (37.4 km/h) |
Weights
| Operating Weight | 52254 lb (23702.1 kg) |
Tires
| Tires | Choose from a variety of tires to match your application. |
Buckets
| Maximum Bucket Capacity | 5.5 yd3 (4.3 m3) |
| Bucket Capacities | 3.4-4.2 m3 4.5-5.5 yd3 |
| Bucket Width | 10.4 ft in (3.2 m) |
| Capacity - Reference Bucket | 4.6 yd3 (3.6 m3) |
| Type - Reference Bucket | GP |
| Breakout Force - Reference Bucket | 48558.8 lb (22025.9 kg) |
Hydraulic System
| Relief Valve Setting | 1000 psi (6900 kPa) |
| Pump Flow Capacity | 80.6 gal/min (305 L/min) |
| Raise Time | 5.9 sec |
| Dump Time | 1.6 sec |
| Lower Time | 2.4 sec |
Axles
| Front | Fixed front |
| Rear | Oscillating +/- 13? |
Hydraulic System
| Pump Type | Piston |
Axles
| Maximum Single-Wheel Rise And Fall | 19.8 in (503 mm) |
Hydraulic System
| Hydraulic Cycle Time - Total | 9.9 s |
| Hydraulic Cycle Time - Lower, Empty, Float Down | 2.4 s |
| Hydraulic Cycle Time - Raise | 5.9 s |
| Pilot System - Pump Output | 84.54 gal/min |
| Hydraulic Cycle Time - Dump | 1.6 s |
| Steering System - Pump Type | Piston |
| Bucket/Work Tool System - Pump Output | 80.6 gal/min |
Brakes
| Brakes | Meets required standards. |
Operating Specifications
| Static Tipping Load - Full Turn | 34120 lb (15476.6 kg) |
| Dump Clearance | 9858.9 ft in (3005 m) |
| Breakout Force | 42300 lb (19187 kg) |
Service Refill Capacities
| Cooling System | 10.3 gal (39 L) |
| Crankcase | 9.3 gal (35.1 L) |
| Hydraulic Tank | 29 gal (109.8 L) |
| Fuel Tank - Standard | 100.4 gal (380.1 L) |
| Transmission | 11.7 gal (44 L) |
| Differential - Final Drives - Front | 16.9 gal (64 L) |
| Differential - Final Drives - Rear | 16.9 gal (64 L) |
Cab
| Rops/Fops | Meets SAE and ISO standards. |
