Caterpillar 962H
Browse All Caterpillar or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 9.25 ft in (2812 mm) |
| Breakout Force | 33075 lb (147 kN) |
| Bucket Width | 9.67 ft in (2946 mm) |
| Bucket Capacity - Heaped | 4.5 yd3 (3.5 m3) |
| Bucket Capacity - Struck | 3.9 yd3 (2.98 m3) |
Dimensions
| Ground Clearance | 1.35 ft in (411.48 mm) |
| Length With Bucket On Ground | 26.75 ft in (8165 mm) |
| Width Over Tires | 9.17 ft in (2784 mm) |
| Height To Top Of Cab | 11.33 ft in (3452 mm) |
| Wheelbase | 11 ft in (3350 mm) |
| Hinge Pin - Max Height | 13.08 ft in (3992 mm) |
| Reach At Max Lift And Dump | 4.25 ft in (1308 mm) |
| Height - Top Of Exhaust Pipe | 132.6 in (3368.04 mm) |
| Centerline Of Rear Axle To Hitch | 66 in (1676.4 mm) |
| Centerline Rear Axle To Edge Of Counterweight | 6.41 ft in (1.96 m) |
| B-Pin Height - Standard | 13.1 ft in (4 m) |
| Height - Top Of Hood | 96.96 in (2462.79 mm) |
| Height - Top Of Rops | 11.33 ft in (3.46 m) |
| Wheel Base | 11 ft in (3.36 m) |
Engine
| Number Of Cylinders | 6 |
| Engine Make | 2236 |
| Engine Model | C7 ACERT |
| Net Power | 211 hp (158 kw) |
| Gross Power | 230 hp (172 kw) |
| Power Measured @ | 1800 rpm |
| Max Torque | 669 lb ft (907 Nm) |
| Displacement | 439 cu in (7.2 L) |
| Bore | 4.4 in (110 mm) |
| Stroke | 5 in (127 mm) |
| Net Power - Iso 9249 | 211 hp (157.4 kw) |
| Net Power - Sae J1349 | 209 hp (155.9 kw) |
| Net Power - 80/1269/Eec | 211 hp (157.4 kw) |
| Gross Power - Sae J1995 | 230 hp (171.6 kw) |
| Engine Model | Cat? C7 ACERT? |
| Flywheel Power | 211 hp (157.4 kw) |
| Peak Torque - 1,400 Rpm - Net | 669 lb ft (907.1 Nm) |
Operational
| Operating Weight | 42700 lb (19365 kg) |
| Fuel Capacity | 83 gal (314 L) |
| Hydraulic System Fluid Capacity | 29 gal (110 L) |
| Engine Oil Fluid Capacity | 7.9 gal (30 L) |
| Cooling System Fluid Capacity | 11 gal (42 L) |
| Transmission Fluid Capacity | 9 gal (34 L) |
| Front Axle/Diff Fluid Capacity | 9.5 gal (36 L) |
| Rear Axle/Diff Fluid Capacity | 9.5 gal (36 L) |
| Static Tipping Weight | 30603 lb (13879 kg) |
| Turning Radius | 23.4 ft in (7090 mm) |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 80 amps |
| Rear Axle Oscillation | 26 degrees |
| Tire Size | 23.5R25 |
Transmission
| Transmission Type | Powershift |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 4 |
| Max Speed - Forward | 23.6 mph (38 km/h) |
| Max Speed - Reverse | 24.9 mph (40 km/h) |
| Forward - 1 | 4.4 mph (7.1 km/h) |
| Forward - 2 | 8.1 mph (13.1 km/h) |
| Forward - 3 | 14 mph (22.6 km/h) |
| Forward - 4 | 23.6 mph (38 km/h) |
| Reverse - 1 | 4.7 mph (7.6 km/h) |
| Reverse - 2 | 8.6 mph (13.9 km/h) |
| Reverse - 3 | 15.2 mph (24.5 km/h) |
| Reverse - 4 | 24.9 mph (40.1 km/h) |
Weights
| Operating Weight | 42700 lb (19368.4 kg) |
Tires
| Tires | Choose from a variety of tires to match your application. |
Buckets
| Maximum Bucket Capacity | 5 yd3 (3.9 m3) |
| Bucket Capacities | 2.7-3.8 m3 3.5-5.0 yd3 |
| Bucket Width | 9.9 ft in (3 m) |
| Capacity - Reference Bucket | 3.6 yd3 (2.7 m3) |
| Type - Reference Bucket | GP |
| Breakout Force - Reference Bucket | 40465.6 lb (18354.9 kg) |
Hydraulic System
| Relief Valve Setting | 1000 psi (6900 kPa) |
| Pump Flow Capacity | 71 gal/min (270 L/min) |
| Raise Time | 6.2 sec |
| Dump Time | 1.3 sec |
| Lower Time | 2.5 sec |
Axles
| Front | Fixed front |
| Rear | Oscillating +/- 13? |
Hydraulic System
| Pump Type | piston |
Axles
| Maximum Single-Wheel Rise And Fall | 18.5 in (469.9 mm) |
Hydraulic System
| Hydraulic Cycle Time - Total | 10 s |
| Hydraulic Cycle Time - Lower, Empty, Float Down | 2.5 s |
| Hydraulic Cycle Time - Raise | 6.2 s |
| Hydraulic Cycle Time - Dump | 1.3 s |
| Steering System - Pump Type | Piston |
| Bucket/Work Tool System - Pump Output | 71 gal/min |
Brakes
| Brakes | Meets required standards. |
Operating Specifications
| Static Tipping Load - Full Turn | 26676 lb (12100.1 kg) |
| Breakout Force | 33075 lb (15002.6 kg) |
Service Refill Capacities
| Cooling System | 11 gal (41.7 L) |
| Crankcase | 7.9 gal (30 L) |
| Hydraulic Tank | 29 gal (109.8 L) |
| Fuel Tank - Standard | 83 gal (314.2 L) |
| Transmission | 9 gal (34.1 L) |
| Differential - Final Drives - Front | 9.5 gal (36 L) |
| Differential - Final Drives - Rear | 9.5 gal (36 L) |
Cab
| Rops/Fops | Meets SAE and ISO standards. |
