Case 221E
Browse All Case or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 8.53 ft in (2598 mm) |
| Bucket Capacity - Heaped | 1.31 yd3 (1.01 m3) |
| Bucket Capacity - Struck | 1.1 yd3 (0.84 m3) |
| Bucket Width | 6.89 ft in (2100 mm) |
| Breakout Force | 9723 lb (4410 kN) |
Dimensions
| Ground Clearance | 1.08 ft in (330 mm) |
| Length With Bucket On Ground | 18.49 ft in (5635 mm) |
| Width Over Tires | 6.25 ft in (1904 mm) |
| Height To Top Of Cab | 9.17 ft in (2793 mm) |
| Wheelbase | 7.71 ft in (2350 mm) |
| Hinge Pin - Max Height | 11.11 ft in (3386 mm) |
| Reach At Max Lift And Dump | 2.85 ft in (867 mm) |
Engine
| Number Of Cylinders | 4 |
| Engine Make | 2349 |
| Engine Model | F4M2011, Tier 2 certified |
| Net Power | 59 hp (43 kw) |
| Gross Power | 60 hp (45 kw) |
| Power Measured @ | 2500 rpm |
| Max Torque | 131 lb ft (178 Nm) |
| Displacement | 190 cu in (3.2 L) |
| Torque Measured @ | 1700 rpm |
Operational
| Operating Weight | 11947 lb (5419 kg) |
| Fuel Capacity | 26 gal (100 L) |
| Hydraulic System Fluid Capacity | 17.7 gal (67 L) |
| Engine Oil Fluid Capacity | 2.7 gal (10 L) |
| Front Axle/Diff Fluid Capacity | 2.1 gal (8 L) |
| Rear Axle/Diff Fluid Capacity | 2.1 gal (8 L) |
| Static Tipping Weight | 9358 lb (4245 kg) |
| Turning Radius | 13.5 ft in (4095 mm) |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 55 amps |
| Rear Axle Oscillation | 24 degrees |
| Tire Size | 365/80 R20 EM SPT9 |
Transmission
| Transmission Type | Hydrostatic transmission |
| Number Of Forward Gears | 2 |
| Number Of Reverse Gears | 2 |
| Max Speed - Forward | 12.4 mph (20 km/h) |
| Max Speed - Reverse | 12.4 mph (20 km/h) |
Hydraulic System
| Relief Valve Setting | 3626 psi (23000 kPa) |
| Pump Flow Capacity | 18.5 gal/min (70 L/min) |
| Raise Time | 6 sec |
| Dump Time | 1 sec |
| Lower Time | 3 sec |
| Pump Type | Open-centered pressure/flow compensated |
