JCB 8035 ZTS
Browse All JCB or Mini Excavator Models
Contents:
Boom/Stick Option (Hex) 1
| Max Reach Along Ground | 17.44 ft in (5315 mm) |
| Minimum Front Swing Radius (No Offset) | 8.18 ft in (2492 mm) |
| Maximum Digging Depth – Dozer Up | 10.43 ft in (3179 mm) |
| Maximum Height To Dipper Nose Pivot Pin | 13.16 ft in (4009 mm) |
| Maximum Vertical Wallcut Depth | 7.11 ft in (2165 mm) |
| Minimum Front Swing Radius (Fully Offset) | 5.35 ft in (1630 mm) |
| Max Digging Reach | 17.84 ft in (5436 mm) |
| Max.Dumping Height | 11.43 ft in (3482 mm) |
| Maximum Digging Depth – Dozer Down | 11.53 ft in (3512 mm) |
Dimensions
| Ground Clearance | 0.89 ft in (270 mm) |
| Height To Top Of Cab | 7.99 ft in (2435 mm) |
| Tail Swing Radius | 2.79 ft in (850 mm) |
| Track Gauge | 4.76 ft in (1450 mm) |
| Width Over Tracks | 5.75 ft in (1750 mm) |
| Overall Width Of Superstructure | 5.44 ft in (1656 mm) |
| Transport Height- Minimum | 7988.85 ft in (2435 m) |
| Transport Length, Minimum | 14639.11 ft in (4462 m) |
| Cab Height | 59.73 in (1517 mm) |
Undercarriage
| Tractive Effort | 70.55 lb (32 kg) |
| Number Of Track Rollers Per Side | 4 |
| Max Travel Speed | 2.68 mph (4.3 km/h) |
| Track Tension | Grease |
Engine
| Fuel | Diesel |
| Starter Motor | 2 KW |
| Engine Model | 403D-I7 |
| Gross Power | 31.7 hp (23.6 kw) |
| Cooling System | Water cooled |
| Net Power | 30.5 hp (22.7 kw) |
| Power Measured @ | 2200 rpm |
| Displacement | 101482.6 cu in (1663 L) |
| Max Torque | 70.8 lb ft (96 Nm) |
| Torque Measured @ | 1600 rpm |
| Alternator | 65 amps |
Operational
| Operating Weight | 8049.1 lb (3651 kg) |
| Fuel Capacity | 10.6 gal (40 L) |
| Cooling System Fluid Capacity | 2.3 gal (8.5 L) |
| Hydraulic System Fluid Capacity | 18.5 gal (70 L) |
| Engine Oil Capacity | 1.2 gal (4.5 L) |
| Operational Voltage | 12 V |
| Alternator Supplied Amperage | 55 amps |
| Hydraulic System Relief Valve Pressure | 3191 psi (22001.2 kPa) |
| Hydraulic Pump Flow Capacity | 26.9 gal/min (101.9 L/min) |
Performance
| Travel Speed Low | 1.5 mph (2.4 km/h) |
| Travel Speed - High | 2.7 mph (4.3 km/h) |
| Gradeability | 36 % |
Swing Mechanism
| Swing Speed | 9.6 rpm |
Blade
| Approach Angle | 24.5 degrees |
Hydraulic System
| Nominal Output | 29.1 gal/min (110 L/min) |
Blade
| Maximum Height | 1.3 ft in (370 mm) |
Hydraulic System
| Slew Main Relief | 190 bar |
| Excavator/Track Main Relief | 245 bar |
Blade
| Dig Depth (Below Ground) | 2.1 ft in (622 mm) |
| Reach In Front Of Tracks | 2.3 ft in (681 mm) |
Hydraulic System
| Hydraulic Motor (Travel) | Piston |
| Auxiliary Hydraulic Flow | 18.3 gal/min (69 L/min) |
Blade
| Blade Width | 1650 |
Hydraulic System
| Pump Type | 2 Variable & 1 Gear |
Blade
| Height | 13.2 in (335 mm) |
Boom
| Boom Swing Left | 45 degrees |
| Boom Swing Right | 45 degrees |
| Bucket Rotation | 186 degrees |
| Dipper Rotation | 119 degrees |
| Bucket Tearout | 6294.7 lb (28 kN) |
| Dipper Tearout | 3821.8 lb (17 kN) |
| Slew Speed | 9.6 rpm |
