JCB 8025 ZTS LC
Browse All JCB or Mini Excavator Models
Contents:
Boom/Stick Option (Hex) 1
| Shipping Length Of Unit | 14.05 ft in (4280 mm) |
| Max Cutting Height | 14.22 ft in (4333 mm) |
| Shipping Height Of Unit | 8.11 ft in (2470 mm) |
| Max Loading Height | 10.37 ft in (3158 mm) |
| Max Reach Along Ground | 15.4 ft in (4691 mm) |
| Max Vertical Wall Digging Depth | 5.06 ft in (1542 mm) |
| Max Digging Depth | 8.47 ft in (2580 mm) |
| Boom/Stick Option (Hex) 1 | 1100 mm dipper |
| Max Digging Height | 14.22 ft in (4333 mm) |
| Max Digging Reach | 15.1 ft in (4600 mm) |
| Maximum Digging Depth – Dozer Down | 8.24 ft in (2509 mm) |
| Maximum Digging Depth – Dozer Up | 8.05 ft in (2452 mm) |
| Maximum Height To Dipper Nose Pivot Pin | 11.31 ft in (3447 mm) |
| Minimum Front Swing Radius (Fully Offset) | 6.07 ft in (1850 mm) |
| Minimum Front Swing Radius (No Offset) | 6.59 ft in (2007 mm) |
Dimensions
| Width To Outside Of Tracks | 4.93 ft in (1502 mm) |
| Length Of Track On Ground | 4.73 ft in (1440 mm) |
| Ground Clearance | 0.89 ft in (270 mm) |
| Height To Top Of Cab | 8.11 ft in (2470 mm) |
| Tail Swing Radius | 2.47 ft in (750 mm) |
| Track Gauge | 4.11 ft in (1252 mm) |
| Overall Width Of Superstructure | 5.09 ft in (1550 mm) |
| Cab Height | 59.73 in (1517 mm) |
| Transport Height- Minimum | 7988.85 ft in (2435 m) |
| Undercarriage Overall Length | 5.24 ft in (1597 mm) |
| Transport Length, Minimum | 13533.47 ft in (4125 m) |
Undercarriage
| Shoe Size | 9.85 in (250 mm) |
| Track Tension | Grease |
| Number Of Track Rollers Per Side | 3 |
| Max Travel Speed | 2.68 mph (4.3 km/h) |
| Ground Pressure | 4.41 psi (30.34 kPa) |
| Tractive Effort | 54.24 lb (24.6 kg) |
Engine
| Fuel | Diesel |
| Starter Motor | 2 Kw |
| Engine Model | 403D-I5 |
| Gross Power | 28.1 hp (20.9 kw) |
| Net Power | 26.9 hp (20 kw) |
| Power Measured @ | 2200 rpm |
| Displacement | 91.3 cu in (1.5 L) |
| Max Torque | 70.8 lb ft (96 Nm) |
| Torque Measured @ | 1600 rpm |
| Alternator | 65 amps |
Operational
| Operating Weight | 6245.7 lb (2833 kg) |
| Fuel Capacity | 10.6 gal (40 L) |
| Cooling System Fluid Capacity | 2.3 gal (8.5 L) |
| Hydraulic System Fluid Capacity | 18.5 gal (70 L) |
| Engine Oil Capacity | 1.2 gal (4.5 L) |
| Operational Voltage | 12 V |
| Alternator Supplied Amperage | 55 amps |
| Hydraulic System Relief Valve Pressure | 3191 psi (22001.2 kPa) |
| Hydraulic Pump Flow Capacity | 26.9 gal/min (101.9 L/min) |
Performance
| Travel Speed Low | 1.5 mph (2.4 km/h) |
| Travel Speed - High | 2.7 mph (4.3 km/h) |
| Gradeability | 36 % |
Swing Mechanism
| Swing Speed | 9.6 rpm |
Blade
| Approach Angle | 31 degrees |
Hydraulic System
| Nominal Output | 27 gal/min (102 L/min) |
Blade
| Maximum Height | 1 ft in (290 mm) |
Hydraulic System
| Slew Main Relief | 190 bar |
| Excavator/Track Main Relief | 220 bar |
Blade
| Dig Depth (Below Ground) | 1.4 ft in (405 mm) |
| Reach In Front Of Tracks | 1.2 ft in (342 mm) |
Hydraulic System
| Hydraulic Motor (Travel) | Piston |
| Auxiliary Hydraulic Flow | 15.4 gal/min (58 L/min) |
Blade
| Blade Width | 1550 mm |
Hydraulic System
| Pump Type | 2 Variable and 1 Gear |
Blade
| Blade Height | 12.6 in (318 mm) |
Boom
| Boom Swing Left | 45 degrees |
| Boom Swing Right | 60 degrees |
| Bucket Rotation | 189 degrees |
| Dipper Rotation | 107 degrees |
| Bucket Tearout | 5395.5 lb (24 kN) |
| Dipper Tearout | 3372.2 lb (15 kN) |
| Slew Speed | 9.6 rpm |
