JCB 67C-1
Browse All JCB or Mini Excavator Models
Contents:
Boom/Stick Option (Hex) 1
| Max Reach Along Ground | 21.34 ft in (6504 mm) |
| Minimum Front Swing Radius (No Offset) | 8.66 ft in (2637 mm) |
| Maximum Digging Depth – Dozer Up | 13.31 ft in (4054 mm) |
| Maximum Height To Dipper Nose Pivot Pin | 16.91 ft in (5153 mm) |
| Maximum Vertical Wallcut Depth | 9.73 ft in (2963 mm) |
| Minimum Front Swing Radius (Fully Offset) | 7.83 ft in (2384 mm) |
| Max Digging Reach | 21.71 ft in (6617 mm) |
| Max.Dumping Height | 14.05 ft in (4281 mm) |
| Maximum Digging Depth – Dozer Down | 13.36 ft in (4070 mm) |
Dimensions
| Ground Clearance | 0.79 ft in (240 mm) |
| Height To Top Of Cab | 8.48 ft in (2582 mm) |
| Tail Swing Radius | 4.55 ft in (1385 mm) |
| Track Gauge | 5.25 ft in (1600 mm) |
| Width Over Tracks | 6.57 ft in (2000 mm) |
| Overall Width Of Superstructure | 5.9 ft in (1798 mm) |
| Transport Height- Minimum | 8530.19 ft in (2600 m) |
| Transport Length, Minimum | 18372.71 ft in (5600 m) |
| Cab Height | 61.19 in (1554 mm) |
Undercarriage
| Tractive Effort | 120.16 lb (54.5 kg) |
| Number Of Track Rollers Per Side | 4 |
| Max Travel Speed | 2.68 mph (4.3 km/h) |
| Track Tension | Grease |
Engine
| Fuel | Diesel |
| Starter Motor | 2 KW |
| Engine Model | KDI 1903 |
| Gross Power | 55 hp (41 kw) |
| Cooling System | Water cooled |
| Net Power | 51.5 hp (38.4 kw) |
| Power Measured @ | 2200 rpm |
| Displacement | 116128.3 cu in (1903 L) |
| Torque Measured @ | 1500 rpm |
Operational
| Operating Weight | 14552.8 lb (6601 kg) |
| Fuel Capacity | 22 gal (83 L) |
| Cooling System Fluid Capacity | 2.7 gal (10 L) |
| Hydraulic System Fluid Capacity | 24.5 gal (92.5 L) |
| Engine Oil Capacity | 2 gal (7.5 L) |
| Operational Voltage | 12 V |
| Hydraulic Pump Flow Capacity | 15.2 gal/min (57.2 L/min) |
Performance
| Travel Speed Low | 1.7 mph (2.6 km/h) |
| Travel Speed - High | 2.9 mph (4.6 km/h) |
| Gradeability | 30 % |
Swing Mechanism
| Swing Speed | 9.6 rpm |
Blade
| Approach Angle | 26 degrees |
Hydraulic System
| Excavator/Track Main Relief | 250 bar |
| Slew Main Relief | 216 bar |
| Nominal Output | 38.1 gal/min (144 L/min) |
Blade
| Maximum Height | 1.6 ft in (473 mm) |
| Dig Depth (Below Ground) | 1.9 ft in (562 mm) |
| Reach In Front Of Tracks | 2.6 ft in (787 mm) |
Hydraulic System
| Hydraulic Motor (Travel) | Piston |
| Auxiliary Hydraulic Flow | 50.2 gal/min (190 L/min) |
Blade
| Blade Width | 2018 mm |
Hydraulic System
| Pump Type | 72 cc |
Blade
| Height | 16.5 in (417 mm) |
Boom
| Boom Swing Left | 60 degrees |
| Boom Swing Right | 60 degrees |
| Dipper Rotation | 118 degrees |
| Bucket Tearout | 10701 lb (47.6 kN) |
| Dipper Tearout | 6879.2 lb (30.6 kN) |
| Slew Speed | 9 rpm |
