John Deere 1050C WH
Browse All John Deere or Crawler Tractor Models
Contents:
Dimensions
| Width Over Tracks | 10.32 ft in (3145 mm) |
| Height To Top Of Cab | 11.95 ft in (3640 mm) |
| Length Of Track On Ground | 10.42 ft in (3174 mm) |
| Ground Clearance | 2.06 ft in (625 mm) |
| Length W/O Blade | 16.03 ft in (4885 mm) |
Undercarriage
| Ground Pressure | 12.9 psi (89 kPa) |
| Number Of Shoes Per Side | 44 |
| Number Of Track Rollers Per Side | 7 |
| Track Pitch | 8.5 in (215 mm) |
| Ground Contact Area | 6000 in2 (3.88 m2) |
Engine
| Number Of Cylinders | 6 |
| Engine Make | 2245 |
| Engine Model | D 9406 TI-E A3 |
| Net Power | 324 hp (241.7 kw) |
| Power Measured @ | 1800 rpm |
| Max Torque | 1129 lb ft (1530.8 Nm) |
| Displacement | 793 cu in (13 L) |
| Torque Measured @ | 1200 rpm |
| Aspiration | Intercooled and turbocharged |
Operational
| Operating Weight | 77445 lb (35129 kg) |
| Fuel Capacity | 161 gal (610 L) |
| Cooling System Fluid Capacity | 18 gal (68 L) |
| Engine Oil Capacity | 6.3 gal (24 L) |
| Hydraulic Fluid Capacity | 55 gal (210 L) |
| Powertrain Fluid Capacity | 55 gal (210 L) |
| Final Drives Fluid Capacity | 5.5 gal (21 L) |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 80 amps |
Transmission
| Transmission Type | Dual-path, electronic-controlled, closed-loop hydrostatic drive |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 6.8 mph (11 km/h) |
| Max Speed - Reverse | 6.8 mph (11 km/h) |
Hydraulic System
| Pump Type | Variable-displacement piston pump with load-sensing proprotional pump flow control |
| Relief Valve Pressure | 2900 psi (20000 kPa) |
| Pump Flow Capacity | 89 gal/min (336 L/min) |
Standard Blade
| Width | 13.8 ft in (4200 mm) |
| Height | 96.5 in (2450 mm) |
| Capacity | 27.7 yd3 (21.2 m3) |
| Blade Angle (Both Directions) | 25 degrees |
| Cutting Depth | 22 in (570 mm) |
