Liebherr L580 XPOWER
Browse All Liebherr or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 10.9 ft in (3322.32 mm) |
| Arm Length | 10 ft in (3048 mm) |
| Breakout Force | 50579.76 lb (224.99 kN) |
| Bucket Capacity - Heaped | 6.8 yd3 (5.2 m3) |
| Bucket Width | 9.1 ft in (2773.68 mm) |
| Digging Depth | 4 ft in (1219.2 mm) |
Dimensions
| Ground Clearance | 1.6 ft in (487.68 mm) |
| Length With Bucket On Ground | 31.7 ft in (9662.16 mm) |
| Height To Top Of Cab | 11.9 ft in (3627.12 mm) |
| Wheelbase | 12.2 ft in (3718.56 mm) |
| Hinge Pin - Max Height | 15 ft in (4572 mm) |
| Reach At Max Lift And Dump | 3.11 ft in (947.93 mm) |
Electrical System
| Alternator | 28/180 (V/A) |
| Voltage | 24 V V (deletedelete) |
| Starter | 24/10.5 (V/HP) |
| Battery | 2 x 180 Ah |
Engine
| Fuel Injection | Electronic Common Rail high-pressure injection |
| Number Of Cylinders | 6 |
| Engine Model | D936 A7 |
| Net Power | 308 hp (229.7 kw) |
| Air Cleaner | Dry type filter with main and safety element, pre-cleaner, service indicator on the Liebherr display |
| Gross Power | 312 hp (232.7 kw) |
| Power Measured @ | 1800 rpm |
| Max Torque | 1450 lb ft |
| Displacement | 642 cu in (10.6 L) |
| Torque Measured @ | 1100 rpm |
| Aspiration | Water-cooled in-line engine with charge-air cooling, exhaust after-treatment through Liebherr-SCR technology |
| Bore | 4.8 in (122 mm) |
| Stroke | 6 in (150.2 mm) |
Operational
| Operating Weight | 60955 lb (27648.8 kg) |
| Fuel Capacity | 96 gal (363.4 L) |
| Hydraulic System Fluid Capacity | 50.2 gal (190.1 L) |
| Engine Oil Fluid Capacity | 10.6 gal (40.2 L) |
| Cooling System Fluid Capacity | 19.3 gal (73.1 L) |
| Hydraulic Fluid Capacity | 27.7 gal (104.9 L) |
| Front Axle/Diff Fluid Capacity | 15.3 gal (58 L) |
| Rear Axle/Diff Fluid Capacity | 15.3 gal (58 L) |
| Static Tipping Weight | 42330 lb (19200.6 kg) |
| Turning Radius | 25 ft in (7620 mm) |
| Tire Size | 26.5R25 L3 |
Transmission
| Max Speed - Forward | 24.9 mph (40.1 km/h) |
| Max Speed - Reverse | 24.9 mph (40.1 km/h) |
Hydraulic System
| Max Operating Pressure | 5511 psi |
| Relief Valve Setting | 4351.2 psi (30000 kPa) |
| Pump Flow Capacity | 84 gal/min (318 L/min) |
| Raise Time | 6.1 sec |
| Dump Time | 2 sec |
| Lower Time | 3.5 sec |
| Pump Type | “Load-sensing” variable axial piston pump with output and flow control, and pressure cut-off in the control block |
