Liebherr L524
Browse All Liebherr or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 9.2 ft in (2804.16 mm) |
| Arm Length | 8.2 ft in (2499.36 mm) |
| Breakout Force | 18210 lb (81.01 kN) |
| Bucket Capacity - Heaped | 2.4 yd3 (1.84 m3) |
| Bucket Width | 8.2 ft in (2499.36 mm) |
| Digging Depth | 2 ft in (609.6 mm) |
Dimensions
| Ground Clearance | 1.6 ft in (487.68 mm) |
| Length With Bucket On Ground | 23.5 ft in (7162.8 mm) |
| Height To Top Of Cab | 10.6 ft in (3230.88 mm) |
| Wheelbase | 9.4 ft in (2865.12 mm) |
| Hinge Pin - Max Height | 12.7 ft in (3870.96 mm) |
| Reach At Max Lift And Dump | 3.5 ft in (1066.8 mm) |
Electrical System
| Alternator | 24/100 (V/A) |
| Voltage | 24 V V (deletedelete) |
| Starter | 24/10.5 (V/HP) |
| Battery | 2 x 135 Ah |
Engine
| Fuel Injection | Electronic Common Rail high-pressure injection |
| Number Of Cylinders | 4 |
| Engine Make | 2245 |
| Engine Model | 4045HFL92 |
| Air Cleaner | Dry air filter with main and safety element, pre-cleaner, service indicator on the display |
| Gross Power | 121 hp (90.3 kw) |
| Power Measured @ | 2000 rpm |
| Max Torque | 354 lb ft |
| Displacement | 275 cu in (4.6 L) |
| Torque Measured @ | 1600 rpm |
| Aspiration | Inline engine, water-cooled, turbo-charged |
| Bore | 4.2 in (106.7 mm) |
| Stroke | 5 in (127 mm) |
Operational
| Operating Weight | 22930 lb (10400.9 kg) |
| Fuel Capacity | 54.2 gal (205.2 L) |
| Hydraulic System Fluid Capacity | 44.9 gal (170 L) |
| Engine Oil Fluid Capacity | 3.9 gal (14.8 L) |
| Cooling System Fluid Capacity | 10 gal (37.9 L) |
| Transmission Fluid Capacity | 1 gal (3.8 L) |
| Hydraulic Fluid Capacity | 29 gal (109.8 L) |
| Front Axle/Diff Fluid Capacity | 4.3 gal (16.3 L) |
| Rear Axle/Diff Fluid Capacity | 4 gal (15.2 L) |
| Static Tipping Weight | 16535 lb (7500.2 kg) |
| Turning Radius | 19 ft in (5791.2 mm) |
| Rear Axle Oscillation | 12 degrees |
| Tire Size | 17.5R25 L3 |
Transmission
| Transmission Type | Stepless hydrostatic travel drive |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 2 |
| Max Speed - Forward | 24.9 mph (40.1 km/h) |
| Max Speed - Reverse | 20.6 mph (33 km/h) |
Hydraulic System
| Max Operating Pressure | 4569 psi |
| Relief Valve Setting | 4351.2 psi (30000 kPa) |
| Pump Flow Capacity | 27 gal/min (102.3 L/min) |
| Raise Time | 6.5 sec |
| Dump Time | 2 sec |
| Lower Time | 5 sec |
| Pump Type | Load-Sensing, variable axial piston pump with output control and pressure cutoff |
