John Deere 244H
Browse All John Deere or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 8.39 ft in (2555 mm) |
| Bucket Capacity - Heaped | 1 yd3 (0.8 m3) |
| Bucket Capacity - Struck | 0.9 yd3 (0.7 m3) |
| Bucket Width | 6.53 ft in (1990 mm) |
| Breakout Force | 10143 lb (45.1 kN) |
Dimensions
| Ground Clearance | 1.09 ft in (330 mm) |
| Length With Bucket On Ground | 16.25 ft in (4950 mm) |
| Width Over Tires | 6.34 ft in (1930 mm) |
| Height To Top Of Cab | 9.83 ft in (2995 mm) |
| Wheelbase | 7.22 ft in (2200 mm) |
| Hinge Pin - Max Height | 10.37 ft in (3160 mm) |
| Reach At Max Lift And Dump | 2.78 ft in (845 mm) |
Engine
| Number Of Cylinders | 4 |
| Engine Make | 2348 |
| Engine Model | 4TNE98 |
| Net Power | 55 hp (41 kw) |
| Gross Power | 58 hp (43 kw) |
| Power Measured @ | 2200 rpm |
| Max Torque | 166 lb ft (225 Nm) |
| Displacement | 202 cu in (3.4 L) |
| Torque Measured @ | 1300 rpm |
| Aspiration | Natural |
Operational
| Operating Weight | 11370 lb (5157 kg) |
| Fuel Capacity | 18.5 gal (70 L) |
| Hydraulic System Fluid Capacity | 19.3 gal (73 L) |
| Engine Oil Fluid Capacity | 3.1 gal (11.5 L) |
| Cooling System Fluid Capacity | 2.9 gal (10.9 L) |
| Transmission Fluid Capacity | 2.7 gal (10 L) |
| Front Axle/Diff Fluid Capacity | 2.6 gal (9.5 L) |
| Rear Axle/Diff Fluid Capacity | 2.6 gal (9.5 L) |
| Static Tipping Weight | 7474 lb (3390.2 kg) |
| Turning Radius | 12.5 ft in (3790 mm) |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 35 amps |
| Rear Axle Oscillation | 22 degrees |
| Tire Size | 17.5/65-20 |
Transmission
| Transmission Type | Hydrostatic |
| Number Of Forward Gears | 2 |
| Number Of Reverse Gears | 2 |
| Max Speed - Forward | 20.1 mph (32.2 km/h) |
| Max Speed - Reverse | 20.1 mph (32.2 km/h) |
Hydraulic System
| Relief Valve Setting | 2990 psi (20615 kPa) |
| Pump Flow Capacity | 21.2 gal/min (80 L/min) |
| Raise Time | 4.3 sec |
| Dump Time | 0.8 sec |
| Lower Time | 3.8 sec |
| Pump Type | Gear |
