JCB 426BHT
Browse All JCB or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 9.44 ft in (2876 mm) |
| Bucket Capacity - Heaped | 2.36 yd3 (1.8 m3) |
| Bucket Width | 8.2 ft in (2498 mm) |
| Breakout Force | 27426.69 lb (122 kN) |
Dimensions
| Ground Clearance | 1.24 ft in (375 mm) |
| Length With Bucket On Ground | 21.46 ft in (6540 mm) |
| Width Over Tires | 7.89 ft in (2403 mm) |
| Height To Top Of Cab | 10.36 ft in (3155 mm) |
| Wheelbase | 9.52 ft in (2900 mm) |
| Hinge Pin - Max Height | 12.6 ft in (3839 mm) |
| Reach At Max Lift And Dump | 3.24 ft in (986 mm) |
Engine
| Number Of Cylinders | 6 |
| Engine Make | 2351 |
| Engine Model | 1006-60T |
| Net Power | 132 hp (98.5 kw) |
| Gross Power | 144 hp (107.4 kw) |
| Power Measured @ | 2200 rpm |
| Max Torque | 433.7 lb ft (588 Nm) |
| Displacement | 365.3 cu in (6 L) |
| Torque Measured @ | 1400 rpm |
| Aspiration | turbocharged |
Operational
| Fuel Capacity | 56.1 gal (212 L) |
| Hydraulic System Fluid Capacity | 55.5 gal (210 L) |
| Engine Oil Fluid Capacity | 3.9 gal (14.7 L) |
| Cooling System Fluid Capacity | 13.3 gal (50 L) |
| Transmission Fluid Capacity | 6.1 gal (23 L) |
| Front Axle/Diff Fluid Capacity | 6.9 gal (26 L) |
| Rear Axle/Diff Fluid Capacity | 6.9 gal (26 L) |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 55 amps |
| Rear Axle Oscillation | 25 degrees |
| Tire Size | 17.5x25x12 ply (L2) |
Transmission
| Transmission Type | 4 wheel drive, semi-autoshift full powershift |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 23.6 mph (37.9 km/h) |
| Max Speed - Reverse | 16.8 mph (26.9 km/h) |
Hydraulic System
| Relief Valve Setting | 3212 psi (22146 kPa) |
| Pump Flow Capacity | 58.2 gal/min (220 L/min) |
| Raise Time | 4.8 sec |
| Dump Time | 1.5 sec |
| Lower Time | 3.4 sec |
| Pump Type | variable displacement piston pumps with load sensing system |
