JCB 426HTM
Browse All JCB or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 9.29 ft in (2831 mm) |
| Breakout Force | 31023.64 lb (138 kN) |
| Bucket Capacity - Heaped | 2.36 yd3 (1.8 m3) |
| Bucket Capacity - Struck | 2.04 yd3 (1.56 m3) |
| Bucket Width | 8.37 ft in (2550 mm) |
Dimensions
| Ground Clearance | 1.46 ft in (442 mm) |
| Length With Bucket On Ground | 22.15 ft in (6750 mm) |
| Height To Top Of Cab | 10.88 ft in (3315 mm) |
| Wheelbase | 9.85 ft in (3000 mm) |
| Hinge Pin - Max Height | 11.9 ft in (3627 mm) |
| Reach At Max Lift And Dump | 3.55 ft in (1081 mm) |
Engine
| Number Of Cylinders | 6 |
| Engine Model | BTAA5.9C |
| Net Power | 150 hp (111.9 kw) |
| Gross Power | 152 hp (113.4 kw) |
| Power Measured @ | 2200 rpm |
| Max Torque | 455.1 lb ft (617 Nm) |
| Displacement | 360.1 cu in (5.9 L) |
| Torque Measured @ | 1600 rpm |
| Aspiration | turbocharged |
Operational
| Operating Weight | 31327.7 lb (14210 kg) |
| Fuel Capacity | 60.8 gal (230 L) |
| Hydraulic System Fluid Capacity | 55.5 gal (210 L) |
| Engine Oil Fluid Capacity | 3.7 gal (14 L) |
| Cooling System Fluid Capacity | 9.3 gal (35 L) |
| Transmission Fluid Capacity | 8 gal (30 L) |
| Front Axle/Diff Fluid Capacity | 10.4 gal (39 L) |
| Rear Axle/Diff Fluid Capacity | 9.8 gal (37 L) |
| Static Tipping Weight | 19158.2 lb (8690 kg) |
| Turning Radius | 19.3 ft in (5860 mm) |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 70 amps |
| Tire Size | 20.5r25 HXA (L3) |
Transmission
| Transmission Type | smooth powershift |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 24 mph (38.5 km/h) |
| Max Speed - Reverse | 15.1 mph (24.3 km/h) |
Hydraulic System
| Relief Valve Setting | 3625 psi (24993.5 kPa) |
| Pump Flow Capacity | 34.9 gal/min (132 L/min) |
| Raise Time | 4.4 sec |
| Dump Time | 1 sec |
| Lower Time | 2.7 sec |
| Pump Type | twin variable displacement piston pumps w/ load sensing system |
