Clark Michigan 45C
Browse All Clark Michigan or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 8.95 ft in (2725 mm) |
| Bucket Capacity - Heaped | 1.77 yd3 (1.35 m3) |
| Bucket Capacity - Struck | 1.48 yd3 (1.13 m3) |
| Bucket Width | 8.21 ft in (2500 mm) |
| Breakout Force | 15152.13 lb (67.41 kN) |
Dimensions
| Ground Clearance | 1.25 ft in (380 mm) |
| Length With Bucket On Ground | 21.08 ft in (6425 mm) |
| Width Over Tires | 7.5 ft in (2283 mm) |
| Height To Top Of Cab | 10.24 ft in (3120 mm) |
| Wheelbase | 8.54 ft in (2603 mm) |
| Hinge Pin - Max Height | 11.65 ft in (3550 mm) |
| Reach At Max Lift And Dump | 2.94 ft in (894 mm) |
Engine
| Number Of Cylinders | 6 |
| Engine Make | 2351 |
| Engine Model | 6.354.4 |
| Net Power | 109 hp (81.3 kw) |
| Gross Power | 116 hp (86.6 kw) |
| Power Measured @ | 2500 rpm |
| Max Torque | 378 lb ft (512.5 Nm) |
| Displacement | 354 cu in (5.9 L) |
| Torque Measured @ | 1400 rpm |
Operational
| Operating Weight | 21392 lb (9703.3 kg) |
| Fuel Capacity | 39.9 gal (151 L) |
| Hydraulic System Fluid Capacity | 31.8 gal (120 L) |
| Engine Oil Fluid Capacity | 3.5 gal (13 L) |
| Cooling System Fluid Capacity | 9.6 gal (36 L) |
| Transmission Fluid Capacity | 5 gal (18.9 L) |
| Front Axle/Diff Fluid Capacity | 3 gal (11 L) |
| Rear Axle/Diff Fluid Capacity | 3 gal (11 L) |
| Static Tipping Weight | 12771 lb (5792.9 kg) |
| Turning Radius | 18.8 ft in (5700 mm) |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 70 amps |
| Rear Axle Oscillation | 18 degrees |
| Tire Size | 17.5-25 |
Transmission
| Transmission Type | clark countershaft powershift |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 17.9 mph (28.8 km/h) |
| Max Speed - Reverse | 17.9 mph (28.8 km/h) |
Hydraulic System
| Relief Valve Setting | 2500 psi (17236.9 kPa) |
| Pump Flow Capacity | 33.9 gal/min (128 L/min) |
| Raise Time | 6 sec |
| Dump Time | 1.5 sec |
| Lower Time | 3.5 sec |
| Pump Type | gear type |
