Caterpillar 924F
Browse All Caterpillar or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 8.86 ft in (2700 mm) |
| Bucket Capacity - Struck | 1.84 yd3 (1.4 m3) |
| Bucket Capacity - Heaped | 2.23 yd3 (1.7 m3) |
| Bucket Width | 7.86 ft in (2395 mm) |
Dimensions
| Length With Bucket On Ground | 21.41 ft in (6524 mm) |
| Width Over Tires | 7.64 ft in (2328 mm) |
| Height To Top Of Cab | 10.29 ft in (3136 mm) |
| Wheelbase | 8.86 ft in (2700 mm) |
| Hinge Pin - Max Height | 11.78 ft in (3590 mm) |
| Reach At Max Lift And Dump | 2.81 ft in (855 mm) |
| Width - Over Tires | 7.65 ft in (2.34 m) |
| Rack Back Angle - Carry | 45 degrees |
| Bucket Pin Height - Maximum Lift | 11.78 ft in (3.6 m) |
| Overall Height | 10.3 ft in (3139.44 mm) |
| Height - Top Of Rops/Fops | 10.29 ft in (3.14 m) |
| Wheel Base | 8.81 ft in (2.69 m) |
Engine
| Number Of Cylinders | 4 |
| Engine Make | 2236 |
| Engine Model | 3114 |
| Net Power | 105 hp (78.3 kw) |
| Gross Power | 111 hp (82.8 kw) |
| Power Measured @ | 2400 rpm |
| Displacement | 268 cu in (4.4 L) |
| Aspiration | Turbocharged |
| Rated Net Power | 105 hp (78.3 kw) |
Operational
| Operating Weight | 19896.8 lb (9025 kg) |
| Fuel Capacity | 41.5 gal (157 L) |
| Hydraulic System Fluid Capacity | 20.4 gal (77 L) |
| Engine Oil Fluid Capacity | 2.7 gal (10 L) |
| Cooling System Fluid Capacity | 9.3 gal (35 L) |
| Transmission Fluid Capacity | 6.1 gal (23 L) |
| Front Axle/Diff Fluid Capacity | 5.6 gal (21 L) |
| Rear Axle/Diff Fluid Capacity | 5.6 gal (21 L) |
| Static Tipping Weight | 15879.9 lb (7203 kg) |
| Rear Axle Oscillation | 24 degrees |
| Tire Size | 17.5-25 |
Transmission
| Transmission Type | Powershift |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 23.9 mph (38.5 km/h) |
| Max Speed - Reverse | 14.8 mph (23.9 km/h) |
| Forward - 1 | 4.5 mph (7.1 km/h) |
| Reverse - 1 | 4.5 mph (7.1 km/h) |
Steering
| Minimum Turning Radius - Over Tires | 201 in (5104.9 mm) |
| Steering Articulation | 40 degrees |
Transmission
| 2 | 8.2 mph (13.2 km/h) |
| 3 | 14.7 mph (23.6 km/h) |
| 4 | 23.8 mph (38.3 km/h) |
Weights
| Operating Weight | 20081 lb (9108.6 kg) |
Tires
| Tread Width | 6.1 ft in (1.9 m) |
| Size | 17.5-25 |
Weights
| Optional Counterweight | 566 lb (256.8 kg) |
Buckets
| Bucket Width | 7.8 ft in (2.4 m) |
Hydraulic System
| Relief Valve Setting | 3600 psi (24821.2 kPa) |
| Pump Flow Capacity | 34.9 gal/min (132 L/min) |
| Raise Time | 4.3 sec |
| Dump Time | 1.3 sec |
| Lower Time | 2.7 sec |
Axles
| Axle Oscillation | 12 degrees |
Operating Specifications
| Static Tipping Load - Full Turn | 13885 lb (6298.2 kg) |
| Breakout Force | 21067 lb (9555.9 kg) |
| Articulation Angle | 40 degrees |
| Reach - Full Lift And 45 Degrees Dump | 2.8 ft in (0.9 m) |
| Dump Clearance At Full Lift And 45 Degrees Dump Angle | 8.8 ft in (2.7 m) |
| Bucket Capacity - With Bolt-On Cutting Edge | 1.8 yd3 (1.4 m3) |
Service Refill Capacities
| Cooling System | 9.3 gal (35.1 L) |
| Fuel Tank | 41.5 gal (157.1 L) |
| Crankcase | 2.7 gal (10 L) |
| Hydraulic Tank | 14 gal (53 L) |
| Hydraulic System - Including Tank | 20.4 gal (77 L) |
| Transmission | 6.1 gal (23.1 L) |
| Front | 5.6 gal (21.1 L) |
| Rear | 5.6 gal (21.1 L) |
Loader Hydraulic System
| Pump Flow - Implement Pump | 35 gal/min |
| Raise | 4.3 s |
| Dump | 1.3 s |
| Lower, Empty, Float Down | 2.7 s |
| Total | 8.3 s |
| Hydraulic Cycle Time | 8.3 s |
| Relief Pressure - Implement Pump | 3600 psi |
