Case 420CT Series 3
Browse All Case or Multi Terrain Loader Models
Contents:
Dimensions
| Width Over Tracks | 5.42 ft in (1651 mm) |
| Height To Top Of Cab | 6.63 ft in (2020 mm) |
| Ground Clearance | 8.39 in (213 mm) |
| Clearance At Max Lift And Dump | 7.94 ft in (2420 mm) |
| Reach At Max Lift And Dump | 2.07 ft in (630 mm) |
| Turning Radius From Center - Inc Bucket | 80.71 in (2050 mm) |
| Turning Radius From Center - Machine Rear | 57.09 in (1450 mm) |
| Length With Bucket | 10.8 ft in (3290 mm) |
| Length With Out Bucket | 8.54 ft in (2600 mm) |
Undercarriage
| Length Of Track On Ground | 4.72 ft in (1438 mm) |
| Ground Contact Area | 1424 in2 (0.92 m2) |
| Number Of Track Rollers Per Side | 3 |
| Width Of Track | 12.6 in (320 mm) |
| Ground Pressure | 5.8 psi (39.99 kPa) |
Engine
| Number Of Cylinders | 4 |
| Engine Make | 2239 |
| Engine Model | 432T/M3 |
| Gross Power | 74 hp (55.2 kw) |
| Net Power | 69 hp (51.5 kw) |
| Power Measured @ | 2500 rpm |
| Peak Torque | 203 lb ft (275.3 Nm) |
| Torque Measured @ | 1400 rpm |
| Displacement | 195 cu in (3.2 L) |
| Aspiration | Turbocharged |
Operational
| Operating Weight | 8340 lb (3783 kg) |
| Cooling System Fluid Capacity | 3.1 gal (11.4 L) |
| Fuel Capacity | 22 gal (83.3 L) |
| Engine Oil Capacity | 2.3 gal (8.5 L) |
| Hydraulic System Fluid Capacity | 13.2 gal (50 L) |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 95 amps |
| Max Speed - Low Range | 5.8 mph (9.4 km/h) |
| Max Speed - High Range | 8.4 mph (13.6 km/h) |
Loader
| Operating Load | 2860 lb (1297.3 kg) |
| Tipping Angle | 5715 degrees |
| Bucket Capacity | 0.6 yd3 (0.5 m3) |
Hydraulic
| Pump Type | Gear |
| Pump Flow | 23.8 gal/min (90 L/min) |
