Mauldin MG622
Browse All Mauldin or Motor Grader Models
Contents:
Dimensions
| Overall Length | 27.38 ft in (8345.43 mm) |
| Width Over Tires | 8.31 ft in (2532.89 mm) |
| Wheelbase | 17.33 ft in (5282.19 mm) |
| Tandem Axle Wheelbase | 4.75 ft in (1447.8 mm) |
| Blade Base | 7.75 ft in (2362.2 mm) |
| Height To Top Of Isomount Cab | 9.67 ft in (2947.42 mm) |
Engine
| Engine Make | 2349 |
| Engine Model | 2012 |
| Max Power | 133 hp (99.2 kw) |
| Net Torque Gears 1-2 | 363.3 lb ft (492.6 Nm) |
| Displacement | 246.6 cu in (4.1 L) |
| Aspiration | Turbocharged and aftercooled |
Operational
| Std Operation Weight - Front Axle | 6695 lb (3036.9 kg) |
| Std Operation Weight - Rear Axle | 16145 lb (7323.3 kg) |
| Hydraulic System Fluid Capacity | 25 gal (94.7 L) |
| Std Operation Weight - Total | 22840 lb (10360.1 kg) |
| Fuel Capacity | 40 gal (151.5 L) |
| Tire Size | 15.5-25 |
| Operating Voltage | 12 V |
Steering
| Articulation Angle | 24 degrees |
| Turning Radius | 20.5 ft in (6.3 m) |
Transmission
| Transmission Type | hydrostatic |
| Number Of Gears - Forward | 2 |
| Number Of Gears - Reverse | 2 |
| Max Speed - Forward | 22 mph (35.5 km/h) |
| Max Speed - Reverse | 22 mph (35.5 km/h) |
Front Axle
| Wheel Lean | 20 degrees |
| Oscillation - Total | 30 degrees |
Moldboard
| Moldboard Width | 12 ft in (3657.6 mm) |
| Moldboard Height | 22 in (558.8 mm) |
| Max Depth Of Cut | 23.5 in (596.9 mm) |
| Side Shift Left | 31.3 in (793.8 mm) |
| Side Shift Right | 26.8 in (679.5 mm) |
Circle
| Diameter | 54 in (1371.6 mm) |
| Max Reach Outside Tires - Left | 77.3 in (1962.2 mm) |
| Max Reach Outside Tires - Right | 71.5 in (1816.1 mm) |
| Max Lift Above Ground | 14.1 in (358.2 mm) |
