Champion 710A
Browse All Champion or Motor Grader Models
Contents:
Dimensions
| Overall Length | 27.75 ft in (8458 mm) |
| Wheelbase | 20 ft in (6096 mm) |
| Blade Base | 8.59 ft in (2616 mm) |
| Overall Height With Cab | 11.09 ft in (3378 mm) |
| Overall Width | 8.17 ft in (2489 mm) |
| Tread Width | 82.01 in (2083 mm) |
Engine
| Torque | 440 lb ft (596.6 Nm) |
| Number Of Cylinders | 6 |
| Gross Horsepower | 148 hp (110.4 kw) |
| Engine Make | Cummins |
| Engine Model | 6B5.9 |
| Net Power | 140 hp (104.4 kw) |
| Power Measured @ | 2200 rpm |
| Torque Measured @ | 1600 rpm |
| Displacement | 360.1 cu in (5.9 L) |
| Bore | 4.1 in (102 mm) |
| Stroke | 4.8 in (120 mm) |
| Aspiration | Turbocharged |
Operational
| Std Operation Weight - Front Axle | 9400 lb (4263.8 kg) |
| Hydraulic System Fluid Capacity | 23.8 gal (90 L) |
| Std Operation Weight - Rear Axle | 21230 lb (9629.8 kg) |
| Std Operation Weight - Total | 30630 lb (13893.6 kg) |
| Oil System Fluid Capacity | 4.4 gal (16.4 L) |
| Fuel Capacity | 100 gal (378.5 L) |
| Cooling System Fluid Capacity | 11.7 gal (44 L) |
| Transmission Fluid Capacity | 10.3 gal (38.8 L) |
| Rear Diff/Final Drive Fluid Capacity | 6.1 gal (23 L) |
| Tandem Case Fluid Capacity (Each) | 26.5 gal (100 L) |
| Tire Size | 13.00 * 24, G-2 |
Steering
| Articulation Angle | 22 degrees |
| Turning Radius | 25.5 ft in (7.8 m) |
Transmission
| Transmission Type | Powershift |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 4 |
| Max Speed - Forward | 24.5 mph (39.4 km/h) |
| Max Speed - Reverse | 17.8 mph (28.6 km/h) |
Front Axle
| Wheel Lean | 18 degrees |
| Oscillation - Total | 16 degrees |
| Ground Clearance | 2 ft in (597 mm) |
Moldboard
| Max Reach Outside - Left | 10 ft in (3035 mm) |
| Max Reach Outside - Right | 10.1 ft in (3061 mm) |
| Moldboard Width | 12.1 ft in (3658 mm) |
| Moldboard Height | 25 in (635 mm) |
| Moldboard Thickness | 0.9 in (22 mm) |
| Side Shift Left | 26.5 in (673 mm) |
| Side Shift Right | 26.5 in (673 mm) |
| Blade Pull At Max Weight | 19109.7 lb (8668 kg) |
| Blade Down Pressure | 16495 lb (7482 kg) |
Hydraulic System
| Pump Flow | 50.5 gal/min (191.2 L/min) |
| Relief Valve Pressure | 2500 psi (17236.9 kPa) |
Circle
| Blade Ground Clearance | 1.5 ft in (432 mm) |
| Blade Cutting Depth | 2.8 ft in (826 mm) |
| Diameter | 66.3 in (1683 mm) |
| Rotation | 360 degrees |
| Shift Left | 30.6 in (775 mm) |
| Shift Right | 29.5 in (749 mm) |
| Blade Tip Angle - Front | 47 degrees |
| Blade Tip Angle - Rear | 5 degrees |
