Caterpillar 930H
Browse All Caterpillar or Integrated Tool Carrier Models
Contents:
Dimensions
| Length W/ Bucket On Ground | 24.94 ft in (7601 mm) |
| Width Over Tires | 8.44 ft in (2570 mm) |
| Height To Top Of Cab | 10.76 ft in (3278 mm) |
| Wheelbase | 9.52 ft in (2900 m) |
| Ground Clearance | 1.35 ft in (411 mm) |
| Hinge Pin Max Height | 13.25 ft in (4049 mm) |
| Dump Clearance At Max Lift | 9.3 ft in (2833 mm) |
| Max Lift Height | 12.76 ft in (3889 mm) |
| Fork Tine Length | 4 ft in (1219.2 mm) |
| Reach At Max Height And Dump | 3.07 ft in (934 mm) |
| Length With Out Forks On Ground | 25.77 ft in (7854 mm) |
Engine
| Engine Make | 2236 |
| Engine Model | C6.6 |
| Net Power | 150 hp (111.9 kw) |
| Max Torque | 547 lb ft (741.7 Nm) |
| Displacement | 403 cu in (6.7 L) |
Operational
| Operating Weight | 28725 lb (13029.5 kg) |
| Fuel Capacity | 59.5 gal (225 L) |
| Cooling System Fluid Capacity | 10.6 gal (40 L) |
| Engine Oil Capacity | 4 gal (15 L) |
| Transmission Fluid Capacity | 9.2 gal (34.5 L) |
| Front Diff Fluid Capacity | 6.9 gal (26 L) |
| Rear Diff Fluid Capacity | 6.7 gal (25 L) |
| Hydraulic System Fluid Capacity | 39.1 gal (148 L) |
| Turning Radius | 17.3 ft in (5257 mm) |
| Static Tipping Load - Bucket | 19933 lb (9041.5 kg) |
| Static Tipping Load - Forks | 15977 lb (7247.1 kg) |
| Tire Size | 20.5R25 L3 XHA |
Transmission
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 3 |
| Max Speed Forward | 23.8 mph (38.4 km/h) |
| Max Speed Reverse | 15 mph (24.2 km/h) |
Hydraulic System
| Relief Valve Setting | 3755 psi (25889.8 kPa) |
| Pump Flow Capacity | 58 gal/min (220 L/min) |
| Raise Time | 5 sec |
| Dump Time | 1.7 sec |
| Lower Time | 2.8 sec |
Bucket
| Breakout Force | 28334 lb (126.1 kN) |
Blade
| Width | 8.4 ft in (2550 mm) |
Bucket
| Bucket Capacity - Heaped | 3 yd3 (2.3 m3) |
| Bucket Capacity - Struck | 2.5 yd3 (1.9 m3) |
