Caterpillar 924H
Browse All Caterpillar or Integrated Tool Carrier Models
Contents:
Dimensions
| Length W/ Bucket On Ground | 23.45 ft in (7147 mm) |
| Width Over Tires | 8.18 ft in (2492 mm) |
| Height To Top Of Cab | 10.59 ft in (3227 mm) |
| Wheelbase | 9.19 ft in (2800 m) |
| Ground Clearance | 1.44 ft in (436 mm) |
| Hinge Pin Max Height | 12.75 ft in (3881 mm) |
| Dump Clearance At Max Lift | 9.28 ft in (2828 mm) |
| Max Lift Height | 11.94 ft in (3637 mm) |
| Fork Tine Length | 4.01 ft in (1220 mm) |
| Reach At Max Height And Dump | 3.26 ft in (992 mm) |
| Length With Out Forks On Ground | 24.95 ft in (7604 mm) |
Engine
| Engine Make | 2236 |
| Engine Model | C6.6 |
| Net Power | 138 hp (103 kw) |
| Max Torque | 496 lb ft (672.5 Nm) |
| Displacement | 403 cu in (6.7 L) |
Operational
| Operating Weight | 25644.2 lb (11632 kg) |
| Fuel Capacity | 59.5 gal (225 L) |
| Cooling System Fluid Capacity | 10.6 gal (40 L) |
| Engine Oil Capacity | 4 gal (15 L) |
| Transmission Fluid Capacity | 6.1 gal (23 L) |
| Front Diff Fluid Capacity | 5.6 gal (21 L) |
| Rear Diff Fluid Capacity | 5.6 gal (21 L) |
| Hydraulic System Fluid Capacity | 39.1 gal (148 L) |
| Turning Radius | 18.5 ft in (5633 mm) |
| Static Tipping Load - Bucket | 17916 lb (8126.6 kg) |
| Static Tipping Load - Forks | 13669 lb (6200.2 kg) |
| Tire Size | 20.5R25 Radial (L-3) |
Transmission
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 3 |
| Max Speed Forward | 23.9 mph (38.5 km/h) |
| Max Speed Reverse | 13.5 mph (21.8 km/h) |
Hydraulic System
| Relief Valve Setting | 3755 psi (25889.8 kPa) |
| Pump Flow Capacity | 39.5 gal/min (152 L/min) |
| Raise Time | 5.1 sec |
| Dump Time | 1.4 sec |
| Lower Time | 2.4 sec |
Bucket
| Breakout Force | 19848 lb (88.3 kN) |
Blade
| Width | 8.4 ft in (2550 mm) |
Bucket
| Bucket Capacity - Heaped | 2.7 yd3 (2.1 m3) |
| Bucket Capacity - Struck | 2.2 yd3 (1.7 m3) |
