John Deere 270D LC
Browse All John Deere or Hydraulic Excavator Models
Contents:
Boom/Stick Option (Hex) 1
| Shipping Length Of Unit | 33.92 ft in (10340 mm) |
| Shipping Height Of Unit | 10.42 ft in (3170 mm) |
| Max Cutting Height | 32.83 ft in (10010 mm) |
| Max Loading Height | 23.17 ft in (7070 mm) |
| Max Reach Along Ground | 34.58 ft in (10550 mm) |
| Max Vertical Wall Digging Depth | 20.08 ft in (6110 mm) |
| Max Digging Depth | 23.83 ft in (7260 mm) |
| Boom/Stick Option (Hex) 1 | Arm Length 10ft.2in. 3.11m |
Boom/Stick Option (Hex) 2
| Shipping Length Of Unit | 35.25 ft in (10740 mm) |
| Max Cutting Height | 34.33 ft in (10460 mm) |
| Shipping Height Of Unit | 11 ft in (3350 mm) |
| Max Loading Height | 24.58 ft in (7490 mm) |
| Max Reach Along Ground | 36.5 ft in (11120 mm) |
| Max Vertical Wall Digging Depth | 23.08 ft in (7030 mm) |
| Max Digging Depth | 25.92 ft in (7910 mm) |
| Boom/Stick Option (Hex) 2 | Arm Length 12ft. 4in. 3.75m |
Dimensions
| Ground Clearance | 1.67 ft in (510 mm) |
| Height To Top Of Cab | 10.18 ft in (3100 mm) |
| Width To Outside Of Tracks | 11.13 ft in (3390 mm) |
| Length Of Track On Ground | 13.25 ft in (4050 mm) |
| Tail Swing Radius | 9.58 ft in (2940 mm) |
| Removal Counterweight Clearance | 3.83 ft in (1180 mm) |
Undercarriage
| Track Gauge | 8.5 ft in (2590 mm) |
| Shoe Size | 32 in (800 mm) |
| Number Of Shoes Per Side | 49 |
| Drawbar Pull | 56074 lb (249.43 kN) |
| Number Of Track Rollers Per Side | 8 |
| Number Of Carrier Rollers Per Side | 2 |
| Max Travel Speed | 3.4 mph (5.5 km/h) |
| Ground Pressure | 5.84 psi (40.3 kPa) |
Engine
| Number Of Cylinders | 6 |
| Engine Make | 2240 |
| Engine Model | 6068H |
| Net Power | 188 hp (140 kw) |
| Power Measured @ | 2100 rpm |
| Max Torque | 599 lb ft (813 Nm) |
| Displacement | 414 cu in (6.8 L) |
| Aspiration | Turbocharged w/ charge cooler |
| Torque Measured @ | 1400 rpm |
Operational
| Operating Weight | 63425 lb (28770 kg) |
| Fuel Capacity | 132 gal (500 L) |
| Cooling System Fluid Capacity | 7.9 gal (29.9 L) |
| Hydraulic System Fluid Capacity | 63.4 gal (240 L) |
| Operating Voltage | 24 V |
| Engine Oil Capacity | 6.5 gal (24.6 L) |
| Swing Drive Fluid Capacity | 2 gal (7.6 L) |
| Alternator Supplied Amperage | 80 amps |
| Hydraulic System Relief Valve Pressure | 4980 psi (34300 kPa) |
| Hydraulic Pump Flow Capacity | 124.7 gal/min (472 L/min) |
Swing Mechanism
| Swing Speed | 12.6 rpm |
| Swing Torque | 56852 lb ft (77140 Nm) |
Buckets
| Reference Bucket Capacity | 1.8 yd3 (1.4 m3) |
| Minimum Bucket Capacity | 1 yd3 (0.7 m3) |
| Maximum Bucket Capacity | 2.1 yd3 (1.6 m3) |
