Hitachi ZX345USLC-6
Browse All Hitachi or Hydraulic Excavator Models
Contents:
Boom/Stick Option (Hex) 1
| Max Cutting Height | 3743.44 ft in (1141000 mm) |
| Max Reach Along Ground | 29.66 ft in (9040 mm) |
| Max Vertical Wall Digging Depth | 20.15 ft in (6140 mm) |
| Max Digging Depth | 22.71 ft in (6920 mm) |
| Arm Digging Force - Sae | 31023.64 lb (138 kN) |
| Bucket Digging Force - Sae | 39341.57 lb (175 kN) |
| Boom/Stick Option (Hex) 1 | Arm Length - 3.11 m (10 ft 2in) |
| Max.Dumping Height | 27.5 ft in (8380 mm) |
| Bucket Digging Force - Iso | 45411.41 lb (202 kN) |
| Arm Digging Force - Iso | 32372.49 lb (144 kN) |
| Max Digging Reach | 3.58 ft in (1090 mm) |
| Min.Front Swing Radius | 11.16 ft in (3400 mm) |
Boom/Stick Option (Hex) 2
| Max Cutting Height | 38.36 ft in (11690 mm) |
| Max Reach Along Ground | 31.57 ft in (9620 mm) |
| Max Vertical Wall Digging Depth | 22.02 ft in (6710 mm) |
| Max Digging Depth | 24.84 ft in (7570 mm) |
| Arm Digging Force - Iso | 28550.74 lb (127 kN) |
| Arm Digging Force - Sae | 27201.88 lb (121 kN) |
| Boom/Stick Option (Hex) 2 | Arm Length - 3.76 m (12 ft 4 in) |
| Bucket Digging Force - Iso | 45411.41 lb (202 kN) |
| Bucket Digging Force - Sae | 39341.57 lb (175 kN) |
| Max Digging Reach | 37.6 ft in (11460 mm) |
| Max.Dumping Height | 28.45 ft in (8670 mm) |
| Minimum Swing Radius | 133.47 in (3390 mm) |
Boom/Stick Option (Hex) 3
| Boom/Stick Option (Hex) 3 | Arm Length - 3.61 m (11 ft 10 in) |
Dimensions
| Ground Clearance | 1.65 ft in (500 mm) |
| Counterweight Clearance | 3.81 ft in (1160 mm) |
| Undercarriage Overall Length | 16.21 ft in (4940 mm) |
| Cab Height | 10.6 ft in (3230 mm) |
Undercarriage
| Max Travel Speed | 2.55 mph (4.1 km/h) |
| Number Of Track Rollers Per Side | 8 |
| Number Of Carrier Rollers Per Side | 2 |
| Number Of Shoes Per Side | 49 |
| Drawbar Pull | 66990 lb (297.99 kN) |
Electrical System
| Battery Capacity | 1400CCA |
| Alternator Rating | 50 amp |
| Voltage | 24 V |
| Batteries | 2 |
| Work Lights | 5halogen |
Cylinders
| Bore (Boom) | 4.8 in (120 mm) |
| Stroke (Boom) | 49.7 in (1260 mm) |
| Rod Diameter (Boom) | 3.4 in (85 mm) |
| Bore (Arm) | 5.4 in (135 mm) |
| Stroke (Arm) | 58.1 in (1475 mm) |
| Rod Diameter (Arm) | 3.8 in (95 mm) |
| Bore (Bucket) | 41.8 in (1060 mm) |
| Stroke (Bucket) | 2.8 in (70 mm) |
| Rod Diameter (Bucket) | 3.2 in (80 mm) |
Engine
| Emissions Level | EPA Final Tier 4 / EU Stage IV |
| Number Of Cylinders | 6 |
| Off-Level Capacity | 70 % |
| Engine Make | Isuzu |
| Engine Model | 6HK1 |
| Net Power | 249 hp (185.7 kw) |
| Power Measured @ | 1900 rpm |
| Aspiration | Turbocharged and charged air cooled |
| Displacement | 476 cu in (7.8 L) |
Capacities
| Engine Oil With Filter | 12.7 gal (48 L) |
| Swing Drive | 3.1 gal (11.7 L) |
| Fuel Tank | 100.4 gal (380 L) |
| Hydraulic Tank | 42.3 gal (160 L) |
| Cooling System | 10.9 gal (41 L) |
| Hydraulic System | 87.2 gal (330 L) |
Swing Mechanism
| Swing Torque | 66749.4 lb ft (90500 Nm) |
| Swing Speed | 10.5 rpm |
Hydraulic System
| Main Pump - Maximum Flow | 62.4 gal/min (236 L/min) |
| Hydraulic System Type | Open center, load sensing |
| Main Pump Type | 3 variable-displacement axial-piston pumps |
| Implement - Operating Pressure | 5033 psi (34701.3 kPa) |
| Travel - Operating Pressure | 5149 psi (35501.1 kPa) |
| Swing - Operating Pressure | 4685 psi (32302 kPa) |
| Power Boost - Operating Pressure | 5511 psi (37997 kPa) |
| Controls | Pilot levers |
