Case CX250D
Browse All Case or Hydraulic Excavator Models
Contents:
Boom/Stick Option (Hex) 1
| Max Digging Depth | 47.77 ft in (14560 mm) |
| Max Digging Reach On Ground | 59.78 ft in (18220 mm) |
| Dump Height | 266.15 in (6760 mm) |
| Minimum Swing Radius | 158.67 in (4030 mm) |
| Bucket Rotation | 175 degrees |
| Maximum Vertical Wallcut Depth | 20.15 ft in (6140 mm) |
| Max.Dumping Height | 38.65 ft in (11780 mm) |
| Mximum Dig Radius | 404.73 in (10280 mm) |
| Dig Radius At Ground Line | 397.64 in (10100 mm) |
Boom/Stick Option (Hex) 2
| Max Vertical Wall Digging Depth | 18.71 ft in (5700 mm) |
| Dump Height | 257.88 in (6550 mm) |
| Minimum Swing Radius | 156.7 in (3980 mm) |
| Boom/Stick Option (Hex) 2 | 8 ft 2 in (2.5 m) Arm |
| Dig Radius At Ground Line | 379.14 in (9630 mm) |
| Bucket Rotation | 175 degrees |
| Maximum Dig Radius | 386.62 in (9820 mm) |
Boom/Stick Option (Hex) 3
| Max Vertical Wall Digging Depth | 21.92 ft in (6680 mm) |
| Dump Height | 277.96 in (7060 mm) |
| Bucket Rotation | 175 degrees |
| Minimum Swing Radius | 159.45 in (4050 mm) |
| Maximum Dig Radius | 424.81 in (10790 mm) |
| Dig Radius At Ground Line | 418.12 in (10620 mm) |
Dimensions
| Tail Swing Radius | 9.68 ft in (2950 mm) |
| Track Shoe Width | 2.63 ft in (800 mm) |
| Cab Height | 131.5 in (3340 mm) |
| Center To Center – Idler To Sprocket | 12.6 ft in (3840 mm) |
| Ground Pressure | 6.2 psi (42.75 kPa) |
| Minimum Ground Clearance | 17.33 in (440 mm) |
| Overall Height | 10.01 ft in (3050 mm) |
| Overall Length (L/Bucket) | 32.42 ft in (9880 mm) |
| Overall Track Length | 15.26 ft in (4650 mm) |
| Boom Length | 0.04 ft in (10.3 mm) |
Undercarriage
| Track Shoe Width | 31.5 in (800 mm) |
Engine
| Fuel Injection | Direct injection – electronic |
| Emission Tier Level | Tier 4 |
| Fuel Filter | Replaceable, full flow spin-on cartridge |
| Air Filter Type | Dry type element with warning restriction indicator |
| Number Of Cylinders | 4 |
| Engine Model | Isuzu 4 HKIX |
| Net Power | 177 hp (132 kw) |
| Power Measured @ | 2000 rpm |
| Max Torque | 458.1 lb ft (621 Nm) |
| Displacement | 317.4 cu in (5.2 L) |
| Fuel Type | Requires ultra-low sulfur fuel B5 biodiesel tolerant |
| Bore | 4.6 in (115 mm) |
| Stroke | 5 in (125 mm) |
| Oil Filter | Replaceable, full flow spin-on cartridge |
Capacities
| Engine Oil W/ Filter Change | 6.2 gal (23.1 L) |
| Swing Drive | 2.6 gal (9.7 L) |
| Fuel Tank | 108.4 gal (410 L) |
| Hydraulic Tank | 38.9 gal (147 L) |
| Cooling System | 8.3 gal (31.4 L) |
| Def Tank | 31.8 gal (120 L) |
| Final Drive | 1.4 gal (5 L) |
| Hydraulic System | 66.1 gal (250 L) |
Operational
| Arm Breakout Force | 8992.4 lb (40 kN) |
| Operating Weight | 63524 lb (28814 kg) |
| Arm Size | 26246.8 ft in (8000 m) |
Performance
| Lift Over End 10' Radius - Lbs (Kg) | 3284.9 lb (1490 kg) |
| Lift Over End Max. Reach | 40168.3 lb (18220 kg) |
| Lift Over Side 10' Radius | 31768.7 lb (14410 kg) |
| Lift Over Side Max. Reach | 2094.4 lb (950 kg) |
Swing Mechanism
| Swing Speed | 10.6 rpm |
Transmission
| Max Speed | 3.5 mph (5.5 km/h) |
Hydraulic System
| Main Pump - Maximum Flow | 123.7 gal/min (468 L/min) |
| System Relief Pressure | 49.8 psi (343 kPa) |
Brakes
| Brakes Type | Mechanical disc |
| Service Brake | SAHR disc – each motor |
| Travel Control | Dual stage relief or counter balance design |
