Hyster H30FT
Contents:
Dimensions
| Length To Fork Face | 7.35 ft in (2239 mm) |
| Overall Width | 3.51 ft in (1068 mm) |
| Overall Height - Mast Lowered | 6.98 ft in (2125 mm) |
| Wheelbase | 4.55 ft in (1385 mm) |
| Ground Clearance | 5.75 in (146 mm) |
| Height To Top Of Overhead Guard | 7.06 ft in (2149 mm) |
| Max Fork Height | 10.61 ft in (3232 mm) |
| Gradeability | 28 % |
| Right Angle Stack | 7.68 ft in (2339 mm) |
| Turning Radius | 6.42 ft in (1955 mm) |
Mast
| Mast Tip Forward | 6 degrees |
| Mast Tip Rear | 6 degrees |
| Load Center | 24.02 in (610 mm) |
| Lower Speed | 92 ft/min (28.05 m/min) |
| Lift Speed | 118 ft/min (35.97 m/min) |
| Load Capacity | 3000 lb (1360.78 kg) |
| Max Fork Spread | 37.6 in (955 mm) |
Engine
| Number Of Cylinders | 4 |
| Engine Model | PSI 2.0L |
| Power | 44 hp (32.9 kw) |
| Torque | 100 lb ft (135.6 Nm) |
| Displacement | 121.9 cu in (2 L) |
| Torque Measured @ | 1300 rpm |
| Fuel Type | LPG |
Operational
| Operating Weight | 6367 lb (2888.1 kg) |
| Tire Type | Pneumatic |
| Number Of Front Wheels | 2 |
| Number Of Rear Wheels | 2 |
| Max Speed | 13.4 mph (21.6 km/h) |
| Operating Voltage | 12 V |
| Drawbar Pull | 2568 lb (1164.9 kg) |
| Front Tire Size | 6.50 x 10 - 10 |
| Rear Tire Size | 5.00 x 8.00 |
| Axle Load - Front | 2876 lb (1304.6 kg) |
| Axle Load - Rear | 3492 lb (1584 kg) |
Transmission
| Number Of Forward / Reverse Speeds | 1 / 1 |
