Caterpillar D6M LGP
Browse All Caterpillar or Crawler Tractor Models
Contents:
Blades
| Vpat-Blade Width | 13.4 ft in (4.09 m) |
| Blade Type | VPAT |
Dimensions
| Length W/ Blade | 17.7 ft in (5393 mm) |
| Width Over Tracks | 9.91 ft in (3020 mm) |
| Height To Top Of Cab | 10.48 ft in (3194 mm) |
| Length Of Track On Ground | 10.18 ft in (3102 mm) |
| Ground Clearance | 1.77 ft in (538 mm) |
| Length W/O Blade | 13.62 ft in (4149 mm) |
| Overall Length - Basic Tractor - With Drawbar | 13.6 ft in (4.15 m) |
| Height | 7.9 ft in (2407.92 mm) |
| Height - Rops/Canopy | 10.3 ft in (3.14 m) |
| Overall Length - With Blade | 212.4 in (5394.96 mm) |
Undercarriage
| Track Gauge | 7.1 ft in (2164.08 mm) |
| Standard Shoe Size | 27.96 in (710 mm) |
| Ground Clearance | 0.15 ft in (44.45 mm) |
| Shoe Type | Moderate Service-Heavy Duty |
| Shoes/Side | 46 |
| Number Of Track Rollers Per Side | 8 |
| Number Of Shoes Per Side | 46 |
| Track On Ground | 10.1 in (256.55 mm) |
| Track Rollers/Side | 8 |
| Ground Pressure | 4.54 psi (31.31 kPa) |
| Width - Shoe | 33.86 in (860.05 mm) |
| Ground Contact Area | 6820 in2 (4.41 m2) |
Ripper
| Number Of Pockets | 3 |
| Ripper Type | Parallelogram |
| Overall Beam Width | 86.7 in (2202 mm) |
| Maximum Penetration | 14.6 in (369.6 mm) |
| Maximum Clearance Raised - Under Tip, Pinned In Bottom Hole | 20 in (506 mm) |
Engine
| Number Of Cylinders | 6 |
| Engine Make | 2236 |
| Engine Model | 3116T |
| Gross Power | 153 hp (114.1 kw) |
| Net Power | 140 hp (104.4 kw) |
| Power Measured @ | 2200 rpm |
| Displacement | 402.8 cu in (6.7 L) |
| Aspiration | Turbocharged |
| Engine Model | 3116 T |
| Flywheel Power | 140 hp (104.4 kw) |
| Maximum Flywheel Power | 153 hp (114.1 kw) |
| Flywheel Power - Power Shift | 140 hp (104.4 kw) |
Operational
| Operating Weight | 36400 lb (16510.8 kg) |
| Fuel Capacity | 82.2 gal (311 L) |
| Cooling System Fluid Capacity | 12.8 gal (48.4 L) |
| Engine Oil Capacity | 6.9 gal (26 L) |
| Hydraulic Fluid Capacity | 7.8 gal (29.2 L) |
| Powertrain Fluid Capacity | 32.3 gal (122 L) |
| Final Drives Fluid Capacity | 1.9 gal (7 L) |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 70 amps |
Transmission
| Transmission Type | Power Shift |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 6.4 mph (10.3 km/h) |
| Max Speed - Reverse | 7.9 mph (12.8 km/h) |
| 1.0 Forward | 2.2 mph (3.4 km/h) |
| 2.0 Forward | 3.8 mph (6.1 km/h) |
| 3.0 Forward | 6.4 mph (10.3 km/h) |
| 1.0 Reverse | 2.7 mph (4.3 km/h) |
| 2.0 Reverse | 4.7 mph (7.5 km/h) |
| 3.0 Reverse | 8 mph (12.8 km/h) |
Weights
| Operating Weight | 37320 lb (16928.1 kg) |
| Operating Weight - Power Shift | 36400 lb (16510.8 kg) |
Hydraulic System
| Pump Type | Piston |
| Relief Valve Pressure | 3600 psi (24821.2 kPa) |
| Pump Flow Capacity | 31.5 gal/min (119 L/min) |
Standard Blade
| Width | 13.4 ft in (4080 mm) |
| Height | 40.4 in (1025 mm) |
| Capacity | 4.2 yd3 (3.2 m3) |
| Cutting Depth | 17.1 in (433 mm) |
Service Refill Capacities
| Cooling System | 12.8 gal (48.5 L) |
| Fuel Tank | 82.2 gal (311.1 L) |
| Final Drive - Each | 1.9 gal (7.1 L) |
| Hydraulic Tank | 7.8 gal (29.2 L) |
| Engine Crankcase | 6.9 gal (26.1 L) |
| Power Train | 32.3 gal (122.1 L) |
| Attachment Hydraulic System Tank Only | 18.3 gal (69.2 L) |
Winch
| Flange Diameter | 19.9 in (504 mm) |
| Oil Capacity | 19.6 gal (74.1 L) |
| Winch And Bracket Length | 44.1 in (1119.9 mm) |
| Drum Diameter | 10 in (254 mm) |
| Drum Width | 13 in (330 mm) |
| Winch Case - Width | 38.4 in (975.2 mm) |
| Weight* | 2813.1 lb (1276.1 kg) |
| Increased Tractor Length - Std | 15 in (381 mm) |
