Caterpillar D6M XL
Browse All Caterpillar or Crawler Tractor Models
Contents:
Blades
| Su - Blade Width | 10.5 ft in (3.21 m) |
| Blade Type | VPAT, SU |
| Vpat-Blade Width | 10.75 ft in (3.28 m) |
Dimensions
| Length W/ Blade | 15.74 ft in (4797 mm) |
| Width Over Tracks | 8.17 ft in (2490 mm) |
| Height To Top Of Cab | 10.11 ft in (3080 mm) |
| Length Of Track On Ground | 8.37 ft in (2550 mm) |
| Ground Clearance | 1.4 ft in (424 mm) |
| Length W/O Blade | 12.28 ft in (3740 mm) |
| Overall Length - Basic Tractor - With Drawbar | 12.25 ft in (3.74 m) |
| Height - Rops/Canopy | 9.9 ft in (3.02 m) |
| Height | 7.5 ft in (2286 mm) |
| Overall Length - With Blade | 189 in (4800.61 mm) |
Undercarriage
| Track Gauge | 6.2 ft in (1889.76 mm) |
| Standard Shoe Size | 23.63 in (600 mm) |
| Ground Clearance | 0.13 ft in (38.1 mm) |
| Shoe Type | Moderate Service-Heavy Duty |
| Number Of Shoes Per Side | 40 |
| Number Of Track Rollers Per Side | 7 |
| Ground Pressure | 7.22 psi (49.79 kPa) |
| Shoes/Side | 40 |
| Ground Contact Area | 4743 in2 (3.06 m2) |
| Track On Ground | 8.31 in (210.82 mm) |
| Track Rollers/Side | 7 |
| Width - Shoe | 23.62 in (599.95 mm) |
Ripper
| Number Of Pockets | 3 |
| Ripper Type | Parallelogram |
| Overall Beam Width | 86.7 in (2202 mm) |
| Maximum Penetration | 18.7 in (474 mm) |
| Maximum Clearance Raised - Under Tip, Pinned In Bottom Hole | 15.5 in (392 mm) |
Engine
| Number Of Cylinders | 6 |
| Engine Make | 2236 |
| Engine Model | 3116T |
| Gross Power | 153 hp (114.1 kw) |
| Net Power | 140 hp (104.4 kw) |
| Power Measured @ | 2200 rpm |
| Displacement | 402.8 cu in (6.7 L) |
| Aspiration | Turbocharged |
| Engine Model | 3116 T |
| Flywheel Power | 140 hp (104.4 kw) |
| Maximum Flywheel Power | 153 hp (114.1 kw) |
| Flywheel Power - Power Shift | 140 hp (104.4 kw) |
Operational
| Operating Weight | 33200 lb (15059.3 kg) |
| Fuel Capacity | 82.2 gal (311 L) |
| Cooling System Fluid Capacity | 12.8 gal (48.4 L) |
| Engine Oil Capacity | 6.9 gal (26 L) |
| Hydraulic Fluid Capacity | 7.8 gal (29.2 L) |
| Powertrain Fluid Capacity | 32.3 gal (122 L) |
| Final Drives Fluid Capacity | 1.9 gal (7 L) |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 70 amps |
Transmission
| Transmission Type | Power Shift |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 6.4 mph (10.3 km/h) |
| Max Speed - Reverse | 7.9 mph (12.8 km/h) |
| 1.0 Forward | 2.2 mph (3.4 km/h) |
| 2.0 Forward | 3.8 mph (6.1 km/h) |
| 3.0 Forward | 6.4 mph (10.3 km/h) |
| 1.0 Reverse | 2.7 mph (4.3 km/h) |
| 2.0 Reverse | 4.7 mph (7.5 km/h) |
| 3.0 Reverse | 8 mph (12.8 km/h) |
Weights
| Operating Weight | 34240 lb (15531.1 kg) |
| Operating Weight - Power Shift | 33200 lb (15059.3 kg) |
Hydraulic System
| Pump Type | Piston |
| Relief Valve Pressure | 3600 psi (24821.2 kPa) |
| Pump Flow Capacity | 31.5 gal/min (119 L/min) |
Standard Blade
| Width | 10.8 ft in (3274 mm) |
| Height | 47.1 in (1195 mm) |
| Capacity | 4.2 yd3 (3.2 m3) |
| Cutting Depth | 17.5 in (444 mm) |
Service Refill Capacities
| Cooling System | 12.7 gal (48 L) |
| Fuel Tank | 82.2 gal (311.1 L) |
| Final Drive - Each | 1.9 gal (7.1 L) |
| Hydraulic Tank | 7.7 gal (29 L) |
| Engine Crankcase | 6.9 gal (26.1 L) |
| Power Train | 32.3 gal (122.1 L) |
| Attachment Hydraulic System Tank Only | 18.3 gal (69.2 L) |
Winch
| Flange Diameter | 19.9 in (504 mm) |
| Oil Capacity | 19.6 gal (74.1 L) |
| Winch And Bracket Length | 44.1 in (1119.9 mm) |
| Drum Diameter | 10 in (254 mm) |
| Drum Width | 13 in (330 mm) |
| Winch Case - Width | 38.4 in (975.2 mm) |
| Weight* | 2813.1 lb (1276.1 kg) |
| Increased Tractor Length - Std | 15 in (381 mm) |
