Zettelmeyer ZL802
Browse All Zettelmeyer or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 9.16 ft in (2790 mm) |
| Bucket Capacity - Heaped | 1.31 yd3 (1 m3) |
| Bucket Width | 6.73 ft in (2050 mm) |
| Breakout Force | 13488.54 lb (60 kN) |
Dimensions
| Ground Clearance | 1.97 ft in (600 mm) |
| Length With Bucket On Ground | 18.15 ft in (5530 mm) |
| Width Over Tires | 6.53 ft in (1990 mm) |
| Height To Top Of Cab | 9.39 ft in (2860 mm) |
| Wheelbase | 7.39 ft in (2250 mm) |
| Hinge Pin - Max Height | 11.49 ft in (3500 mm) |
| Reach At Max Lift And Dump | 2.66 ft in (810 mm) |
Engine
| Number Of Cylinders | 4 |
| Engine Model | KHD BF 4M 1012 E |
| Net Power | 75.1 hp (56 kw) |
| Gross Power | 77.8 hp (58 kw) |
| Power Measured @ | 2100 rpm |
| Max Torque | 221.3 lb ft (300 Nm) |
| Displacement | 195.3 cu in (3.2 L) |
| Torque Measured @ | 1500 rpm |
| Aspiration | turbo water cooled |
Operational
| Operating Weight | 14771 lb (6700 kg) |
| Fuel Capacity | 26.5 gal (100 L) |
| Hydraulic System Fluid Capacity | 29.1 gal (110 L) |
| Engine Oil Fluid Capacity | 2.4 gal (9 L) |
| Front Axle/Diff Fluid Capacity | 2.3 gal (8.7 L) |
| Rear Axle/Diff Fluid Capacity | 3.1 gal (11.5 L) |
| Static Tipping Weight | 10141.3 lb (4600 kg) |
| Turning Radius | 14.8 ft in (4500 mm) |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 55 amps |
| Rear Axle Oscillation | 20 degrees |
| Tire Size | 15.5-25 |
Transmission
| Transmission Type | hydrostatic full power shift |
| Number Of Forward Gears | 2 |
| Number Of Reverse Gears | 2 |
| Max Speed - Forward | 12.5 mph (20 km/h) |
| Max Speed - Reverse | 12.5 mph (20 km/h) |
Hydraulic System
| Relief Valve Setting | 3045.8 psi (21000 kPa) |
| Pump Flow Capacity | 21.7 gal/min (82 L/min) |
| Raise Time | 6.5 sec |
| Dump Time | 1.5 sec |
| Lower Time | 4 sec |
| Pump Type | gear type |
