Zettelmeyer ZL402
Browse All Zettelmeyer or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 7.91 ft in (2410 mm) |
| Bucket Capacity - Heaped | 0.66 yd3 (0.5 m3) |
| Bucket Width | 5.42 ft in (1650 mm) |
| Breakout Force | 7418.7 lb (33 kN) |
Dimensions
| Ground Clearance | 1.01 ft in (305 mm) |
| Length With Bucket On Ground | 14.74 ft in (4490 mm) |
| Width Over Tires | 5.29 ft in (1610 mm) |
| Height To Top Of Cab | 8.17 ft in (2490 mm) |
| Wheelbase | 6.07 ft in (1850 mm) |
| Hinge Pin - Max Height | 9.78 ft in (2980 mm) |
| Reach At Max Lift And Dump | 2.07 ft in (630 mm) |
Engine
| Number Of Cylinders | 3 |
| Engine Model | KHD F 3 L 1011 |
| Net Power | 36.3 hp (27 kw) |
| Gross Power | 37.6 hp (28 kw) |
| Power Measured @ | 2300 rpm |
| Max Torque | 84.1 lb ft (114 Nm) |
| Displacement | 125 cu in (2.1 L) |
| Torque Measured @ | 1800 rpm |
| Aspiration | natural |
Operational
| Operating Weight | 7500 lb (3402 kg) |
| Fuel Capacity | 11.1 gal (42 L) |
| Hydraulic System Fluid Capacity | 15.9 gal (60 L) |
| Engine Oil Fluid Capacity | 1.9 gal (7 L) |
| Front Axle/Diff Fluid Capacity | 1.5 gal (5.5 L) |
| Rear Axle/Diff Fluid Capacity | 2.2 gal (8 L) |
| Static Tipping Weight | 5511.6 lb (2500 kg) |
| Turning Radius | 12 ft in (3650 mm) |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 60 amps |
| Rear Axle Oscillation | 20 degrees |
| Tire Size | 10.5-18 |
Transmission
| Transmission Type | hydrostatic full power shift |
| Number Of Forward Gears | 2 |
| Number Of Reverse Gears | 2 |
| Max Speed - Forward | 12.5 mph (20 km/h) |
| Max Speed - Reverse | 12.5 mph (20 km/h) |
Hydraulic System
| Relief Valve Setting | 3050 psi (21029 kPa) |
| Pump Flow Capacity | 8.5 gal/min (32 L/min) |
| Raise Time | 6 sec |
| Dump Time | 2.5 sec |
| Lower Time | 5 sec |
| Pump Type | gear type |
