John Deere 824K Z-Bar
Browse All John Deere or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 10.47 ft in (3190 mm) |
| Bucket Capacity - Heaped | 6.02 yd3 (4.6 m3) |
| Bucket Capacity - Struck | 5.24 yd3 (4 m3) |
| Bucket Width | 10.73 ft in (3270 mm) |
| Breakout Force | 41678 lb (185.4 kN) |
Dimensions
| Ground Clearance | 1.51 ft in (460 mm) |
| Length With Bucket On Ground | 30.39 ft in (9260 mm) |
| Width Over Tires | 10.06 ft in (3065 mm) |
| Height To Top Of Cab | 11.49 ft in (3500 mm) |
| Wheelbase | 11.36 ft in (3460 mm) |
| Hinge Pin - Max Height | 14.7 ft in (4480 mm) |
| Reach At Max Lift And Dump | 4.2 ft in (1280 mm) |
Engine
| Number Of Cylinders | 6 |
| Engine Make | 2240 |
| Engine Model | 6135H, Tier III certified |
| Net Power | 333 hp (248.4 kw) |
| Power Measured @ | 1600 rpm |
| Max Torque | 1194 lb ft (1618.9 Nm) |
| Displacement | 824 cu in (13.6 L) |
| Torque Measured @ | 900 rpm |
| Aspiration | Turbocharged charge air cooled |
| Torque Rise | 59 % |
Operational
| Operating Weight | 57783.2 lb (26210 kg) |
| Fuel Capacity | 124.1 gal (469.4 L) |
| Hydraulic System Fluid Capacity | 42.1 gal (159 L) |
| Engine Oil Fluid Capacity | 10.1 gal (37.9 L) |
| Cooling System Fluid Capacity | 12.6 gal (47.4 L) |
| Transmission Fluid Capacity | 7.4 gal (27.9 L) |
| Front Axle/Diff Fluid Capacity | 12.2 gal (45.9 L) |
| Rear Axle/Diff Fluid Capacity | 12.2 gal (45.9 L) |
| Static Tipping Weight | 45212.4 lb (20508 kg) |
| Turning Radius | 19.5 ft in (5920 mm) |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 80 amps |
| Rear Axle Oscillation | 26 degrees |
| Tire Size | 26.5 R 25 |
Transmission
| Transmission Type | Countershaft, powershift |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 24.9 mph (40 km/h) |
| Max Speed - Reverse | 18.8 mph (30.1 km/h) |
Hydraulic System
| Relief Valve Setting | 3650 psi (25165.9 kPa) |
| Pump Flow Capacity | 135.6 gal/min (513 L/min) |
| Raise Time | 5.9 sec |
| Dump Time | 1.3 sec |
| Lower Time | 2.5 sec |
| Pump Type | two variable displacement, load-sensing axial piston |
