John Deere 744H
Browse All John Deere or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 9.99 ft in (3042 mm) |
| Bucket Capacity - Heaped | 5.25 yd3 (4 m3) |
| Bucket Capacity - Struck | 5 yd3 (3.8 m3) |
| Bucket Width | 9.98 ft in (3040 mm) |
| Breakout Force | 37821 lb (168.24 kN) |
Dimensions
| Ground Clearance | 1.53 ft in (465 mm) |
| Length With Bucket On Ground | 28.17 ft in (8586 mm) |
| Width Over Tires | 9.65 ft in (2940 mm) |
| Height To Top Of Cab | 11.55 ft in (3520 mm) |
| Wheelbase | 11.16 ft in (3400 mm) |
| Hinge Pin - Max Height | 14.05 ft in (4281 mm) |
| Reach At Max Lift And Dump | 4.17 ft in (1270 mm) |
Engine
| Number Of Cylinders | 6 |
| Engine Make | 2240 |
| Engine Model | 6125A |
| Net Power | 260 hp (194 kw) |
| Gross Power | 283 hp (211 kw) |
| Power Measured @ | 2000 rpm |
| Max Torque | 943 lb ft (1280 Nm) |
| Displacement | 766 cu in (12.5 L) |
| Torque Measured @ | 1500 rpm |
| Aspiration | Turbocharged and Aftercooled |
| Torque Rise | 45 % |
Operational
| Operating Weight | 50298.5 lb (22815 kg) |
| Fuel Capacity | 114 gal (432 L) |
| Hydraulic System Fluid Capacity | 38 gal (144 L) |
| Engine Oil Fluid Capacity | 10.1 gal (38 L) |
| Cooling System Fluid Capacity | 11.4 gal (43 L) |
| Transmission Fluid Capacity | 7.4 gal (28 L) |
| Front Axle/Diff Fluid Capacity | 12.2 gal (46 L) |
| Rear Axle/Diff Fluid Capacity | 12.2 gal (46 L) |
| Static Tipping Weight | 37897.5 lb (17190 kg) |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 55 amps |
| Rear Axle Oscillation | 26 degrees |
| Tire Size | 26.5-25 |
Transmission
| Transmission Type | Power Shift |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 24.5 mph (39.5 km/h) |
| Max Speed - Reverse | 19.3 mph (31 km/h) |
Hydraulic System
| Relief Valve Setting | 3200 psi (22000 kPa) |
| Pump Flow Capacity | 104 gal/min (393 L/min) |
| Raise Time | 6.6 sec |
| Dump Time | 1.5 sec |
| Lower Time | 3 sec |
| Pump Type | Piston Pump |
