John Deere 3038E
Browse All John Deere or Utility Tractor Models
Contents:
Dimensions
| Wheelbase | 62.8 ft in (1595.12 mm) |
| Approximate Shipping Weight (Open-Station; Cab) | 1007.9 kg |
| Front Axle Clearance | 14.3 in (363.22 mm) |
| Turning Radius With Brakes | 2.7 m |
| Turning Radius Without Brakes | 9.52 ft in (2.9 m) |
Engine
| Number Of Cylinders | 3 |
| Rated Engine Speed | 2500 rpm |
| Engine Model | 3TNV86CT-NJT |
| Engine Manufacturer | Yanmar |
| Family | FYDXL1.57TDA, EYDXL1.57TDA, GYDXL1.57TDA |
| Power Take-Off (Pto) Power | 30 hp |
| Engine Type | Diesel |
| Injection Pump Type | High pressure common rail direct injection |
| Emissions Compliance | Final Tier 4 |
| Cylinder Liners | Cast-In-Block |
| Compression Ratio | 19.1:1 |
| Gross Power | 36.8 hp (27.4 kw) |
| Lubrication | Pressurized |
| Cooling System | Water pump |
| Air Cleaner | Dual element |
| Engine Torque At Rated Speed | 105 Nm |
| Displacement | 95.9 cu in (1.6 L) |
| Aspiration | Turbocharged |
| Fuel Tank Capacity | 7.6 gal (28.5 L) |
| Bore | 3.4 in (86 mm) |
| Stroke | 3.6 in (90 mm) |
Fluid Capacities
| Crankcase With Filter | 4.8 L |
| Transmission And Hydraulic System | 21.0 L |
Electrical
| Battery Size | 500 CCA |
| Alternator (12-V) | 75 amp |
| Starter Size | 1.9 hp |
Fuel System
| Fuel System Type | High pressure common rail direct injection |
Power Take-Off(Pto)
| Standard | Rear - 540 rpm |
| Control | Independent |
| Clutch | Multi disc, wet |
| Brake (For Mid And Rear Pto) | Multiple wet disc |
Transmission
| Cruise Control | Optional |
| Standard Transmission; Forward/Reverse | Hydrostatic transmission (HST) |
| Left-Hand Reverser | No |
| Brakes | Wet disc |
| Steering | Power steering |
| Axle Capacity | Front - 798 kg, Rear - 1197 kg |
| Differential Lock | Yes |
| Final Drive Type | Bull Gear |
Tires
| Front | Farm - 7-14, Turf - 27x8.5-15, R4 - 25x8.5-14, R4 - 27x8.5-15 |
| Rear | Farm - 11.2-24, Turf - 41x14-20, R4 - 15-19.5, R4 - 43x16-20 |
Hydraulic
| Maximum Operating Pressure | 2500 psi (17236.9 kPa) |
| Draft Control Sensing | Position control |
| Remote Control Valves Available | Up to two (optional) |
| Pump Rated Output | Steering - 15.0 L/min, Implement - 20.2 L/min |
| Pump Type | Dual gear |
| Hydraulic Type | Open Center |
Final Drive
| Final Drive Type | Bull Gear |
| Differential Lock | Yes |
3-Point Hitch
| Category | Category 1 |
| Lift Capacity, 24-In. Behind Link Arms | 615.1 kg |
Operator Station
| Rollover Protective Structure | Rigid, ASAE S478 |
| Platform - Flat/Straddle | Semi-flat |
| Gear Shift Location - Console/Floor | Left Hand Side |
