Caterpillar 236B Series 2
Browse All Caterpillar or Skid Steer Loader Models
Contents:
Dimensions
| Length With Bucket | 11.5 ft in (3515 mm) |
| Width Over Tires | 5.5 ft in (1676 mm) |
| Ground Clearance | 9.31 in (236.22 mm) |
| Height To Top Of Cab | 6.83 ft in (2092 mm) |
| Wheelbase | 3.75 ft in (1134 mm) |
| Length W/O Bucket | 9.17 ft in (2800 mm) |
| Clearance At Max Lift And Dump | 7.83 ft in (2398 mm) |
| Reach At Max Lift And Dump | 21 in (541 mm) |
| Length - Without Bucket | 110 in (2794 mm) |
| Maximum Dump Angle | 40 degrees |
| Maximum Overall Height | 156 in (3962.4 mm) |
| Rack Back Angle - Maximum Height | 97.4 degrees |
| Reach - Maximum Lift/Dump | 21 in (533.4 mm) |
| Maximum Reach - With Arms Parallel | 53 in (1346.2 mm) |
| Bucket Pin Height - Carry Position | 10 in (254 mm) |
| Bucket Pin Height - Maximum Lift | 10.17 ft in (0.26 m) |
| Bumper Overhang - Rear Axle | 41 in (1041.41 mm) |
| Clearance At Maximum Lift And Dump | 94 in (2387.6 mm) |
| Departure Angle | 28 degrees |
| Height - Top Of Cab | 6.84 ft in (0.18 m) |
| Length - With Bucket On Ground | 138 in (3505.2 mm) |
| Turning Radius From Center - Inc Bucket | 83 in (2097 mm) |
| Turning Radius From Center - Machine Rear | 64 in (1623 mm) |
| Vehicle Width Over Tires | 66 in (1676.4 mm) |
| Wheel Base | 3.75 ft in (0.1 m) |
| Turn Radius From Center - Bucket | 83 in (2108.2 mm) |
| Turn Radius From Center - Coupler | 52 in (1320.8 mm) |
| Turn Radius From Center - Rear | 64 in (1625.6 mm) |
Operating Specifications
| Rated Operating Capacity With Optional Counterweight | 2050 lb (929.87 kg) |
| Tipping Load | 3900 lb (1769.02 kg) |
| Breakout Force - Tilt Cylinder | 5484 lb (2487.51 kg) |
| Rated Operating Capacity | 1950 lb (884.51 kg) |
Engine
| Number Of Cylinders | 4 |
| Engine Make | 2236 |
| Engine Model | 3044C DIT |
| Gross Power | 75 hp (56 kw) |
| Net Power | 70 hp (52 kw) |
| Power Measured @ | 2600 rpm |
| Displacement | 201 cu in (3.3 L) |
| Bore | 3.7 in (94 mm) |
| Stroke | 4.7 in (119.4 mm) |
| Gross Power - Sae J1995 | 75 hp (56 kw) |
| Engine Model | Cat C3.4 DIT |
| Net Power - Sae 1349 | 71 hp (53 kw) |
| Net Flywheel Power | 71 hp (53 kw) |
Operational
| Operational Weight | 7007 lb (3178 kg) |
| Fuel Capacity | 23.8 gal (90 L) |
| Cooling System Fluid Capacity | 2.6 gal (10 L) |
| Engine Oil Fluid Capacity | 2.6 gal (10 L) |
| Hydraulic System Fluid Capacity | 13.7 gal (52 L) |
| Max Speed | 7.5 mph (12.1 km/h) |
| Chain Box Fluid Capacity - Each Side | 1.8 gal (7 L) |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 90 amps |
Power Train
| Travel Speed Forward | 7.6 mph (12.3 km/h) |
| Travel Speed Reverse | 7.6 mph (12.3 km/h) |
| Travel Speed Reverse - 2-Speed Option | 11.6 mph (18.7 km/h) |
| Travel Speed Forward - 2-Speed Option | 11.6 mph (18.7 km/h) |
Loader
| Breakout Force | 5484 lb (2487 kg) |
| Operating Load Rating | 1950 lb (884 kg) |
| Tipping Angle | 4000 degrees |
| Bucket Capacity | 0.5 yd3 (0.4 m3) |
Weights
| Operating Weight | 7007 lb (3178.4 kg) |
Hydraulic
| Pump Flow Capacity | 22 gal/min (84 L/min) |
| Relief Valve Pressure | 3335 psi (23000 kPa) |
Hydraulic System
| Hydraulic Power | 42.8 hp (32 kw) |
| Loader Hydraulic Pressure | 3335 psi |
| Loader Hydraulic Flow | 22 gal/min |
| Hydraulic Flow | Standard |
Service Refill Capacities
| Cooling System | 2.6 gal (9.9 L) |
| Fuel Tank | 23.8 gal (90.1 L) |
| Hydraulic Tank | 9.2 gal (34.9 L) |
| Engine Crankcase | 2.4 gal (9.1 L) |
| Hydraulic System | 13.7 gal (51.9 L) |
| Chain Box - Each Side | 1.8 gal (6.9 L) |
Cab
| Rops | SAE J1040 MAY94, ISO 3471:1994 |
| Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
