Caterpillar 775F
Browse All Caterpillar or Rock Truck Models
Contents:
Dimensions
| Overall Length | 33.92 ft in (10338.82 mm) |
| Overall Width | 17.68 ft in (5392 mm) |
| Overall Height | 14.5 ft in (4430 mm) |
| Wheelbase | 13.83 ft in (4215 mm) |
| Ground Clearance | 2.5 ft in (762 mm) |
| Dump Height | 30.42 ft in (9261 mm) |
| Dump Ground Clearance | 2.08 ft in (625 mm) |
| Inside Body Depth - Maximum | 6.5 ft in (1.99 m) |
| Inside Body Length | 20.08 ft in (6.13 m) |
| Inside Body Width | 13.08 ft in (3.99 m) |
| Loading Height - Empty | 12.92 ft in (3.94 m) |
| Centerline Front Tire Width | 10.5 ft in (3.21 m) |
| Centerline Of Rear Dual Tire Width | 9 ft in (2.75 m) |
| Dump Clearance | 2 ft in (0.61 m) |
| Engine Guard Clearance | 2.33 ft in (0.72 m) |
| Front Canopy Height | 14.5 ft in (4.42 m) |
| Height - Top Of Rops | 13.5 ft in (4.12 m) |
| Overall Canopy Width | 16.33 ft in (4.98 m) |
| Overall Height - Body Raised | 30.42 ft in (9.28 m) |
| Overall Tire Width | 14.5 ft in (4.42 m) |
| Rear Axle - Clearance | 2.17 ft in (0.67 m) |
| Rear Axle - Tail | 9.25 ft in (2.82 m) |
| Wheel Base | 13.75 ft in (4.2 m) |
| Operating Width | 17.18 ft in (5233.42 mm) |
| Outside Body Width | 14 ft in (4.27 m) |
| Overall Body Length | 30.25 ft in (9.23 m) |
Dump
| Dump Angle | 60 degrees |
| Lower Time | 12.5 sec |
| Raise Time | 9.5 sec |
| Load Capacity - Struck | 41.8 yd3 (32 m3) |
| Load Capacity - Heaped | 54.8 yd3 (41.9 m3) |
| Rated Payload | 140000 lb (63502.94 kg) |
Engine
| Number Of Cylinders | 12 |
| Engine Make | 2236 |
| Engine Model | C27 ACERT |
| Gross Power | 787 hp (587 kw) |
| Net Power | 740 hp (552 kw) |
| Power Measured @ | 2000 rpm |
| Max Torque | 2582 lb ft (3500.8 Nm) |
| Displacement | 1649 cu in (27.1 L) |
| Aspiration | Turbocharged |
| Peak Torque | 2582 lb ft (3500.8 Nm) |
| Bore | 5.4 in (137.2 mm) |
| Stroke | 6 in (152.4 mm) |
| Net Power - Cat | 740 hp (551.9 kw) |
| Net Power - Iso 9249 | 740 hp (551.9 kw) |
| Net Power - Sae J1349 | 740 hp (551.9 kw) |
| Net Power - 80/1269/Eec | 740 hp (551.9 kw) |
| Gross Power - Sae J1995 | 787 hp (586.9 kw) |
| Engine Model | Cat C27 ACERT |
| Flywheel Power | 740 hp (551.9 kw) |
| Rated Engine Speed | 2000 rpm |
Operational
| Fuel Capacity | 185 gal (700 L) |
| Cooling System Fluid Capacity | 46 gal (175 L) |
| Engine Oil Capacity | 19 gal (72 L) |
| Diff And Final Drive Fluid Capacity | 41 gal (155 L) |
| Steering System Fluid Capacity | 16 gal (60 L) |
| Brake/Hoist System Fluid Capacity | 81 gal (307 L) |
| Hydraulic System Fluid Capacity | 19 gal (72 L) |
| Tire Size | 24.00R35(E4) |
Transmission
| Transmission Type | Gear |
| Number Of Gears - Forward | 7 |
| Number Of Gears - Reverse | 1 |
| Max Speed | 41.9 mph (67.5 km/h) |
| Reverse | 8.8 mile/h |
| Forward - 1 | 6.7 mph (10.8 km/h) |
| Forward - 2 | 9.3 mph (15 km/h) |
| Forward - 3 | 12.6 mph (20.3 km/h) |
| Forward - 4 | 17 mph (27.4 km/h) |
| Forward - 5 | 23 mph (37.1 km/h) |
| Forward - 6 | 31 mph (49.9 km/h) |
| Forward - 7 | 41.9 mph (67.5 km/h) |
Steering
| Steering Standards | SAE J1511 OCT90, ISO 5010: 1992 |
| Steer Angle | 31 degrees |
| Turning Diameter - Front | 77.1 ft in (23.5 m) |
| Turning Circle - Clearance Diameter | 85.7 ft in (26.2 m) |
Weights
| Empty Weight | 105830.6 lb (48004 kg) |
| Loaded Weight | 242001.2 lb (109770 kg) |
| Weight Distribution Front - Empty | 49 % |
| Weight Distribution Rear - Empty | 51 % |
| Weight Distribution Front - Loaded | 33 % |
| Weight Distribution Rear - Loaded | 67 % |
Tires
| Standard Tire | 24.00R35 (E4) |
Brakes
| Brake Surface - Front | 216 in2 (0.2 m2) |
| Brake Surface - Rear | 9497 in2 (6.2 m2) |
| Brake Standards | ISO 3450: 1996 |
Body Hoists
| Pump Flow - High Idle | 148 gal/min |
| Relief Valve Setting - Raise | 2750 psi |
| Body Raise Time - High Idle | 9.5 s |
| Body Lower Time - Float | 12.5 s |
| Relief Valve Setting - Lower | 500 psi |
Final Drives
| Planetary Ratio | 4.80:1 |
| Differential Ratio | 3.64:1 |
| Total Reduction Ratio | 17.49:1 |
Operating Specifications
| Nominal Payload Class (100%) | 140000 lb (63502.9 kg) |
| Top Speed - Loaded | 41.9 mph (67.5 km/h) |
| Maximum Capacity | 140000 lb (63502.9 kg) |
| Raise Time | 9.5 s |
| Lower Time | 12.5 s |
| Steer Angle | 31 degrees |
| Body Capacity - Sae 2:1 | 54.8 yd3 (41.9 m3) |
| Maximum Working Payload (110%) | 154000 lb (69853.2 kg) |
| Not To Exceed Payload (120%)* | 168000 lb (76203.5 kg) |
| Turning Diameter - Front | 77.1 ft in (23.6 m) |
Service Refill Capacities
| Cooling System | 46 gal (174.2 L) |
| Differential - Final Drives | 41 gal (155.3 L) |
| Steering Tank | 9 gal (34.1 L) |
| Steering System - Including Tank | 16 gal (60.6 L) |
| Fuel Tank | 185 gal (700.4 L) |
| Torque Converter - Transmission System - Including Sump | 19 gal (72 L) |
| Brake Hoist System - Includes Tank | 81 gal (306.7 L) |
| Crankcase | 25 gal (94.7 L) |
| Torque Converter - Transmission System | 14 gal (53 L) |
| Brake / Hoist / Fan Hydraulic Tank | 35 gal (132.5 L) |
Weight Distributions - Approximate
| Front Axle - Empty | 49 % |
| Front Axle - Loaded | 33 % |
| Rear Axle - Empty | 51 % |
| Rear Axle - Loaded | 67 % |
Capacity - Dual Slope - 100% Fill Factor
| Struck | 43.3 yd3 (33.2 m3) |
| Heaped 2:1 (Sae) | 55.6 yd3 (42.6 m3) |
Capacity - Flat Floor - 100% Fill Factor
| Struck | 41.8 yd3 (32 m3) |
| Heaped 2:1 (Sae) | 54.8 yd3 (41.9 m3) |
Rops
| Rops/Fops Standards | .ISO 3471:1994 ISO 3449:1992 Level II |
Sound
| Sound Standards | ANSI/SAE J1166 MAY90. |
Suspension
| Rear Axle - Oscillation | 8 degrees |
| Effective Cylinder Stroke - Front | 9.3 in (235 mm) |
| Effective Cylinder Stroke - Rear | 5.9 in (149.9 mm) |
Approximate Weights - Dual Slope
| Body | 29877 lb (13552 kg) |
Approximate Weights - Flat Floor
| Body | 29665 lb (13455.9 kg) |
