Caterpillar 611
Browse All Caterpillar or Motor Scraper Models
Contents:
Dimensions
| Overall Length | 39.44 ft in (12020 mm) |
| Overall Width | 10.73 ft in (3270 mm) |
| Overall Height | 10.63 ft in (3240 mm) |
| Wheelbase | 23.17 ft in (7060 mm) |
| Height - Scraper Blade Maximum | 13.8 in (350.52 mm) |
| Height - Top Of Cab | 10.63 ft in (0.27 m) |
| Length - Overall Machine | 473 in (12014.2 mm) |
| Rear Axle - Rear Of Machine | 80.91 in (2054.86 mm) |
| Wheel Base | 23.16 ft in (0.59 m) |
| Width - Inside Of Bowl | 114.9 in (2918.46 mm) |
| Width - Outside Rear Tires | 114.9 in (2918.46 mm) |
| Width - Overall Machine | 128.6 in (3266.44 mm) |
| Width - Rear Tire Center Lines | 81 in (2057.4 mm) |
| Axle To Vertical Hitch Pin | 15.5 in (393.7 mm) |
| Width - Tractor | 120.9 in (3070.86 mm) |
| Front Of Tractor To Front Axle | 114.2 in (2900.68 mm) |
| Ground Clearance - Tractor | 16.73 in (424.95 mm) |
| Height - Overall Shipping | 127.5 in (3238.5 mm) |
Tractor Engine
| Model | 3306T |
| Gross Power | 265 hp (197.7 kw) |
| Displacement | 638 cu in (10.5 L) |
Engine
| Tractor Engine | 3306 |
Tractor Engine
| Net Power - Gears 1-2 | 265 hp (197.7 kw) |
| Gross Power - Gears 1-2 | 279 hp (208.1 kw) |
| Caterpillar Net Power | 265 hp (197.7 kw) |
| Iso 9249 | 265 hp (197.7 kw) |
| Eec 80/1269 | 265 hp (197.7 kw) |
| Sae J1349 | 262.2 hp (195.6 kw) |
| Bore | 4.8 in (120.7 mm) |
| Stroke | 6 in (152.4 mm) |
| Net Power - Gears 3-8 | 265 hp (197.7 kw) |
Scraper Engine
| Displacement | 640.8 cu in (10.5 L) |
| Net Power - Gear 1 | 265 hp (197.7 kw) |
Operational
| Fuel Capacity | 153.3 gal (580 L) |
Transmission
| Max Speed Forward | 27.6 mph (44.4 km/h) |
| Reverse | 2.17 mile/h |
Steering
| Width - 180 Degrees Turn | 33.5 ft in (10.2 m) |
Transmission
| 1 Forward | 2.2 mph (3.6 km/h) |
| 2 Forward | 3.6 mph (5.8 km/h) |
| 3 Forward | 6.2 mph (10 km/h) |
| 4 Forward | 10.2 mph (16.5 km/h) |
| 5 Forward | 17.5 mph (28.2 km/h) |
| 6 Forward | 27.6 mph (44.5 km/h) |
Weights
| Total Operating - Empty | 52690.5 lb (23900 kg) |
| Operating Weight | 88640 lb (40206.5 kg) |
Bowl
| Rated Payload | 36023.6 lb (16340 kg) |
| Heaped Capacity | 14.4 yd3 (11 m3) |
| Struck Capacity | 10.5 yd3 (8 m3) |
| Max Depth Of Cut | 13.9 in (353 mm) |
| Width Of Cut | 9.6 ft in (2903 mm) |
Hydraulics
| Bowl Cylinder Bore | 5 in (127 mm) |
| Bowl Cylinder Stroke | 22.6 in (574.1 mm) |
| Steering Circuit | 44 gal/min |
| Scraper Circuit | 38 gal/min |
| Relief Valve - Steering Circuit | 1000.76 psi |
| Ejector Cylinder Bore | 4.3 in (108 mm) |
| Ejector Cylinder Stroke | 0.2 in (4.4 mm) |
| Apron Cylinder Bore | 3.3 in (82.6 mm) |
| Apron Cylinder Stroke | 27.8 in (706.2 mm) |
Scraper Bowl
| Width - Cut - To Router Bits | 114.3 in (2903.3 mm) |
| Rated Load | 36000 lb (16329.4 kg) |
| Capacity - Struck | 11 yd3 (8.5 m3) |
| Depth Of Cut - Maximum | 13.9 in (353.1 mm) |
| Ground Clearance - Maximum | 14.8 in (376 mm) |
| Depth Of Spread - Maximum | 14.8 in (376 mm) |
| Scraper Capacity - Heaped | 15 yd3 (11.5 m3) |
Service Refill Capacities - Tractor
| Transmission | 9.5 gal (36 L) |
| Differential | 16 gal (60.6 L) |
| Final Drive - Each | 16 gal (60.6 L) |
| Cooling System | 17 gal (64.4 L) |
| Hydraulic Reservoir | 42 gal (159 L) |
| Crankcase | 7 gal (26.5 L) |
Weights - Standard, Tandem
| Total Operating - Empty | 52640 lb (23877.2 kg) |
| Front Axle | 34740 lb (15757.8 kg) |
| Rear Axle | 17900 lb (8119.4 kg) |
| Total Operating - Loaded | 88640 lb (40206.5 kg) |
| Front Axle Weight - Loaded | 54206 lb (24587.5 kg) |
| Rear Axle - Weight - Loaded | 43434 lb (19701.4 kg) |
