Volvo G970
Browse All Volvo or Motor Grader Models
Contents:
Dimensions
| Overall Length | 31.08 ft in (9500 mm) |
| Width Over Tires | 9 ft in (2780 mm) |
| Wheelbase | 21.33 ft in (6531 mm) |
| Blade Base | 9.08 ft in (2790 mm) |
| Height To Top Of Isomount Cab | 10.42 ft in (3225 mm) |
Engine
| Number Of Cylinders | 6 |
| Engine Make | 2244 |
| Engine Model | D9B |
| Power Measured @ | 1700 rpm |
| Torque Measured @ | 1550 rpm |
| Max Power | 262 hp (195.4 kw) |
| Net Power Gears 7-8 | 262 hp (195.4 kw) |
| Net Torque Gears 7-8 | 876 lb ft (1188 Nm) |
| Displacement | 573 cu in (9.4 L) |
| Aspiration | Turbocharged, Aftercooled |
Operational
| Std Operation Weight - Front Axle | 11680 lb (5300 kg) |
| Hydraulic System Fluid Capacity | 24 gal (91 L) |
| Std Operation Weight - Rear Axle | 29980 lb (13600 kg) |
| Std Operation Weight - Total | 41660 lb (18900 kg) |
| Max Operation Weight - Front Axle | 18500 lb (8390 kg) |
| Max Operation Weight - Rear Axle | 34100 lb (15470 kg) |
| Max Operation Weight - Total | 50000 lb (22680 kg) |
| Oil System Fluid Capacity | 10.4 gal (39 L) |
| Fuel Capacity | 132 gal (498 L) |
| Cooling System Fluid Capacity | 12.4 gal (47 L) |
| Transmission Fluid Capacity | 16 gal (61 L) |
| Tandem Case Fluid Capacity (Each) | 26.4 gal (100 L) |
| Tire Size | 14:00 x 24, G-2 |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 80 amps |
Steering
| Articulation Angle | 21 degrees |
| Turning Radius | 25.3 ft in (7700 m) |
Transmission
| Transmission Type | HTE 840, Fully sequential, direct drive, Volvo powershift transmission |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 4 |
| Max Speed - Forward | 27.4 mph (43.8 km/h) |
| Max Speed - Reverse | 19.3 mph (30.1 km/h) |
Front Axle
| Wheel Lean | 18 degrees |
| Oscillation - Total | 16 degrees |
| Ground Clearance | 1.8 ft in (590 mm) |
Moldboard
| Moldboard Width | 12 ft in (3657.6 mm) |
| Moldboard Height | 29.1 in (737 mm) |
| Moldboard Thickness | 1 in (25 mm) |
| Max Depth Of Cut | 30.5 in (775 mm) |
| Side Shift Left | 26.5 in (673 mm) |
| Side Shift Right | 26.5 in (673 mm) |
| Blade Pull At Max Weight | 30690 lb (13923 kg) |
| Blade Down Pressure | 20420 lb (9253 kg) |
Hydraulic System
| Pump Type | Axial piston pump |
| Pump Flow | 55 gal/min (208 L/min) |
| Relief Valve Pressure | 3000 psi (20684.3 kPa) |
Circle
| Diameter | 64 in (1626 mm) |
| Rotation | 360 degrees |
| Shift Left | 30.5 in (775 mm) |
| Shift Right | 29.5 in (749 mm) |
| Max Reach Outside Tires - Left | 78 in (1970 mm) |
| Max Reach Outside Tires - Right | 77 in (1960 mm) |
| Blade Tip Angle - Front | 45 degrees |
| Blade Tip Angle - Rear | 6 degrees |
