Volvo G80
Browse All Volvo or Motor Grader Models
Contents:
Dimensions
| Overall Length | 20.84 ft in (6350 mm) |
| Width Over Tires | 7.75 ft in (2362 mm) |
| Wheelbase | 15.34 ft in (4674 mm) |
| Blade Base | 6.17 ft in (1880 mm) |
Engine
| Number Of Cylinders | 4 |
| Engine Make | 2347 |
| Engine Model | 4B3.9 |
| Net Power Gear 1-2 | 85 hp (63.4 kw) |
| Power Measured @ | 2500 rpm |
| Max Power | 85 hp (63.4 kw) |
| Net Power Gears 7-8 | 85 hp (63.4 kw) |
| Displacement | 239.3 cu in (4 L) |
Operational
| Std Operation Weight - Front Axle | 5004.5 lb (2270 kg) |
| Std Operation Weight - Rear Axle | 9987 lb (4530 kg) |
| Hydraulic System Fluid Capacity | 30.2 gal (114 L) |
| Std Operation Weight - Total | 14991.5 lb (6800 kg) |
| Fuel Capacity | 39.1 gal (148 L) |
| Cooling System Fluid Capacity | 4.5 gal (17 L) |
| Rear Diff/Final Drive Fluid Capacity | 4.5 gal (17 L) |
| Tandem Case Fluid Capacity (Each) | 18 gal (68 L) |
| Tire Size | 15X19.5, TL, G-2 |
Steering
| Turning Radius | 16.5 ft in (5.1 m) |
Transmission
| Transmission Type | hydrostatic |
| Max Speed - Forward | 19.9 mph (32 km/h) |
| Max Speed - Reverse | 19.9 mph (32 km/h) |
Front Axle
| Wheel Lean | 15 degrees |
| Oscillation - Total | 35 degrees |
| Ground Clearance | 1.4 ft in (406 mm) |
Moldboard
| Moldboard Width | 10 ft in (3048 mm) |
| Moldboard Height | 19 in (482.6 mm) |
| Moldboard Thickness | 0.7 in (15.9 mm) |
| Max Depth Of Cut | 8 in (203 mm) |
| Side Shift Left | 58 in (1473.2 mm) |
| Side Shift Right | 58 in (1473.2 mm) |
Hydraulic System
| Pump Type | single flow |
| Pump Flow | 24.1 gal/min (91 L/min) |
| Relief Valve Pressure | 1800 psi (12410.6 kPa) |
Circle
| Diameter | 39 in (990.6 mm) |
| Rotation | 120 degrees |
