Komatsu GD675-3
Browse All Komatsu or Motor Grader Models
Contents:
Dimensions
| Overall Length | 32.37 ft in (9865 mm) |
| Width Over Tires | 8.37 ft in (2550 mm) |
| Wheelbase | 19.92 ft in (6070 mm) |
| Tandem Axle Wheelbase | 5.04 ft in (1535 mm) |
| Blade Base | 835 ft in (2600 mm) |
| Height To Top Of Isomount Cab | 10.24 ft in (3120 mm) |
Engine
| Number Of Cylinders | 6 |
| Net Power Gear 4-6 | 199.9 hp (149 kw) |
| Engine Make | 2238 |
| Engine Model | SAA6D114E-3 |
| Net Power Gear 1-2 | 179.7 hp (134 kw) |
| Power Measured @ | 1900 rpm |
| Net Power Gear 5-6 | 199.9 hp (149 kw) |
| Torque Measured @ | 1400 rpm |
| Max Power | 199.9 hp (149 kw) |
| Net Power Gears 7-8 | 199.9 hp (149 kw) |
| Net Torque Gears 1-2 | 612.2 lb ft (830 Nm) |
| Net Torque Gears 3-4 | 719.2 lb ft (975 Nm) |
| Net Torque Gears 5-6 | 719.2 lb ft (975 Nm) |
| Net Torque Gears 7-8 | 719.2 lb ft (975 Nm) |
| Displacement | 504.7 cu in (8.3 L) |
| Aspiration | Turbocharged and air-to-air aftercooled |
Operational
| Std Operation Weight - Front Axle | 9479.9 lb (4300 kg) |
| Hydraulic System Fluid Capacity | 11.9 gal (45 L) |
| Std Operation Weight - Rear Axle | 25375.3 lb (11510 kg) |
| Std Operation Weight - Total | 34855.1 lb (15810 kg) |
| Fuel Capacity | 89.9 gal (340 L) |
| Cooling System Fluid Capacity | 10.5 gal (39.5 L) |
| Transmission Fluid Capacity | 11.9 gal (45 L) |
| Circle Gearbox Fluid Capacity | 1.4 gal (5 L) |
| Tandem Case Fluid Capacity (Each) | 22 gal (83 L) |
| Tire Size | low pressure, tubeless, 17.5R25 |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 90 amps |
Steering
| Articulation Angle | 23 degrees |
| Turning Radius | 2 ft in (6.9 m) |
Transmission
| Transmission Type | Full power shift transmission |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 4 |
| Max Speed - Forward | 26.3 mph (42.2 km/h) |
| Max Speed - Reverse | 23.8 mph (38.3 km/h) |
Front Axle
| Wheel Lean | 20 degrees |
| Oscillation - Total | 32 degrees |
| Ground Clearance | 2.7 ft in (630 mm) |
Moldboard
| Moldboard Width | 12 ft in (3710 mm) |
| Moldboard Height | 26 in (660 mm) |
| Moldboard Thickness | 1 in (25 mm) |
| Max Depth Of Cut | 32.1 in (815 mm) |
| Side Shift Left | 32.3 in (820 mm) |
| Side Shift Right | 32.3 in (820 mm) |
Hydraulic System
| Pump Type | load-sensing closed center hydraulics |
| Pump Flow | 51 gal/min (194 L/min) |
| Relief Valve Pressure | 3000 psi (20600 kPa) |
Circle
| Diameter | 60.3 in (1530 mm) |
| Rotation | 360 degrees |
| Shift Left | 24.7 in (625 mm) |
| Shift Right | 24.7 in (625 mm) |
| Max Reach Outside Tires - Left | 78.8 in (2000 mm) |
| Max Reach Outside Tires - Right | 78.8 in (2000 mm) |
| Max Lift Above Ground | 19.9 in (505 mm) |
| Blade Tip Angle - Front | 40 degrees |
| Blade Tip Angle - Rear | 5 degrees |
