Fiat-Hitachi FG105
Browse All Fiat-Hitachi or Motor Grader Models
Contents:
Dimensions
| Overall Length | 27.96 ft in (8521 mm) |
| Width Over Tires | 8.34 ft in (2540 mm) |
| Wheelbase | 5.05 ft in (1538 mm) |
| Rear Ground Clearance | 1.09 ft in (331 mm) |
| Tandem Axle Wheelbase | 19.59 ft in (5969 mm) |
| Front Ground Clearance | 2.09 ft in (635 mm) |
| Blade Base | 8.67 ft in (2642 mm) |
| Height To Top Of Isomount Cab | 10.96 ft in (3340 mm) |
Engine
| Number Of Cylinders | 6 |
| Engine Make | 2347 |
| Engine Model | 6 CT8.3 |
| Power Measured @ | 2300 rpm |
| Net Power Gear 5-6 | 197.2 hp (147 kw) |
| Torque Measured @ | 1500 rpm |
| Max Power | 197.2 hp (147 kw) |
| Net Torque Gears 7-8 | 555.4 lb ft (753 Nm) |
| Displacement | 506.5 cu in (8.3 L) |
| Aspiration | turbocharged |
Operational
| Hydraulic System Fluid Capacity | 25 gal (94.6 L) |
| Max Operation Weight - Front Axle | 9281.5 lb (4210 kg) |
| Max Operation Weight - Rear Axle | 25110.7 lb (11390 kg) |
| Oil System Fluid Capacity | 5.4 gal (20.3 L) |
| Max Operation Weight - Total | 34392.2 lb (15600 kg) |
| Fuel Capacity | 79 gal (299 L) |
| Cooling System Fluid Capacity | 7.2 gal (27 L) |
| Transmission Fluid Capacity | 6.7 gal (25 L) |
| Rear Diff/Final Drive Fluid Capacity | 11.1 gal (42 L) |
| Circle Gearbox Fluid Capacity | 0.8 gal (2.8 L) |
| Tandem Case Fluid Capacity (Each) | 8.1 gal (30.3 L) |
| Tire Size | 13X24(10PR) |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 45 amps |
Steering
| Articulation Angle | 25 degrees |
| Turning Radius | 32.8 ft in (10 m) |
Transmission
| Transmission Type | full powershift |
| Number Of Gears - Forward | 6 |
| Number Of Gears - Reverse | 3 |
| Max Speed - Forward | 26.1 mph (42 km/h) |
| Max Speed - Reverse | 17.1 mph (27.4 km/h) |
Front Axle
| Wheel Lean | 17.5 degrees |
| Oscillation - Total | 19 degrees |
| Ground Clearance | 2.1 ft in (635 mm) |
Moldboard
| Moldboard Width | 9.1 ft in (2762 mm) |
| Moldboard Height | 37.6 in (953 mm) |
| Max Depth Of Cut | 6.5 in (165 mm) |
| Side Shift Left | 21 in (533 mm) |
| Side Shift Right | 27 in (685 mm) |
| Blade Down Pressure | 17174.1 lb (7790 kg) |
Hydraulic System
| Pump Type | full hydraulic, variable displacement |
| Pump Flow | 43.1 gal/min (163 L/min) |
| Relief Valve Pressure | 414.4 psi (2857 kPa) |
Circle
| Diameter | 69.1 in (1753 mm) |
| Rotation | 360 degrees |
| Max Reach Outside Tires - Left | 69.3 in (1759 mm) |
| Max Reach Outside Tires - Right | 81 in (2057 mm) |
| Max Lift Above Ground | 24.5 in (622 mm) |
| Blade Tip Angle - Rear | 27.5 degrees |
