Caterpillar 140M2 AWD
Browse All Caterpillar or Motor Grader Models
Contents:
Dimensions
| Overall Length | 29.2 ft in (8898 mm) |
| Width Over Tires | 8.47 ft in (2581 mm) |
| Wheelbase | 20.1 ft in (6126 mm) |
| Rear Ground Clearance | 1.13 ft in (344 mm) |
| Tandem Axle Wheelbase | 5 ft in (1523 mm) |
| Front Ground Clearance | 1.97 ft in (600 mm) |
| Blade Base | 8.39 ft in (2557 mm) |
| Height To Top Of Isomount Cab | 10.79 ft in (3287 mm) |
Engine
| Engine Make | 2236 |
| Engine Model | C9.3 ACERT VHP |
| Power Measured @ | 2100 rpm |
| Torque Measured @ | 2100 rpm |
| Net Power Gears 7-8 | 243 hp (181.3 kw) |
| Net Torque Gears 7-8 | 920 lb ft (1247.4 Nm) |
| Displacement | 567.5 cu in (9.3 L) |
Operational
| Std Operation Weight - Front Axle | 9684 lb (4392.6 kg) |
| Std Operation Weight - Rear Axle | 30227 lb (13710.8 kg) |
| Hydraulic System Fluid Capacity | 26.5 gal (100 L) |
| Std Operation Weight - Total | 39911 lb (18103.4 kg) |
| Max Operation Weight - Front Axle | 13343 lb (6052.3 kg) |
| Max Operation Weight - Rear Axle | 36444 lb (16530.8 kg) |
| Oil System Fluid Capacity | 8 gal (30 L) |
| Max Operation Weight - Total | 49787 lb (22583.1 kg) |
| Fuel Capacity | 109.9 gal (416 L) |
| Cooling System Fluid Capacity | 14.8 gal (56 L) |
| Transmission Fluid Capacity | 17.2 gal (65 L) |
| Circle Gearbox Fluid Capacity | 1.9 gal (7 L) |
| Tandem Case Fluid Capacity (Each) | 17 gal (64 L) |
Steering
| Articulation Angle | 20 degrees |
| Turning Radius | 25.5 ft in (7.8 m) |
Transmission
| Transmission Type | Direct Drive, Powershift |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 6 |
| Max Speed - Forward | 29 mph (46.7 km/h) |
| Max Speed - Reverse | 22.9 mph (36.9 km/h) |
Front Axle
| Wheel Lean | 18 degrees |
| Oscillation - Total | 32 degrees |
| Ground Clearance | 2 ft in (600 mm) |
Moldboard
| Moldboard Width | 12 ft in (3657.6 mm) |
| Moldboard Height | 24 in (609.6 mm) |
| Moldboard Thickness | 0.9 in (22 mm) |
| Max Depth Of Cut | 28.2 in (715 mm) |
| Side Shift Left | 20.1 in (510 mm) |
| Side Shift Right | 26 in (660 mm) |
| Blade Pull At Max Weight | 20044 lb (9091.9 kg) |
| Blade Down Pressure | 22884 lb (10380.1 kg) |
Hydraulic System
| Pump Type | Variable Piston |
| Pump Flow | 55.7 gal/min (210.9 L/min) |
| Relief Valve Pressure | 3500 psi (24131.7 kPa) |
Circle
| Diameter | 60.3 in (1530 mm) |
| Rotation | 360 degrees |
| Shift Left | 27.4 in (695 mm) |
| Shift Right | 28.7 in (728 mm) |
| Max Reach Outside Tires - Left | 70.5 in (1790 mm) |
| Max Reach Outside Tires - Right | 77.9 in (1978 mm) |
| Max Lift Above Ground | 18.9 in (480 mm) |
| Blade Tip Angle - Front | 40 degrees |
| Blade Tip Angle - Rear | 5 degrees |
