Case CX75C SR
Browse All Case or Midi Excavator Models
Contents:
Boom/Stick Option (Hex) 1
| Max Reach Along Ground | 20.58 ft in (6270 mm) |
| Max Digging Depth | 13.55 ft in (4130 mm) |
| Boom/Stick Option (Hex) 1 | Boom length 12 ft 8 in (3901 mm ) , Arm length 5 ft 7 in (1737 mm ) |
| Max.Dumping Height | 17.33 ft in (5280 mm) |
Dimensions
| Width To Outside Of Tracks | 7.7 ft in (2346.96 mm) |
| Length Of Track On Ground | 9.4 ft in (2865.12 mm) |
| Ground Clearance | 1.19 ft in (360 mm) |
| Height To Top Of Cab | 9.1 ft in (2773.68 mm) |
| Tail Swing Radius | 4.24 ft in (1290 mm) |
| Overall Height | 9.1 ft in (2773.68 mm) |
| Center To Center – Idler To Sprocket | 7.3 ft in (2225.04 mm) |
| Overall Length | 217.32 in (5519.93 mm) |
| Upper Structure Ground Clearance | 2.6 ft in (792.48 mm) |
Undercarriage
| Ground Pressure | 4.79 psi (33 kPa) |
| Track Shoe Width | 17.72 in (450 mm) |
Engine
| Emissions Certification | Tier 4 Final |
| Fuel | Requires ultra low-sulfur fuel B5 biodiesel tolerant |
| Cylinders | 4-cylinder in-line |
| Emission Tier Level | Tier 4 |
| Fuel Injection | Direct injection – electronic |
| Fuel Filter | Replaceable, full flow spin-on cartridge |
| Air Filter Type | Dry type element with warning restriction indicator |
| Engine Model | Isuzu 4LE2X |
| Engine Type | Water-cooled, 4-cycle, high pressure common rail system. Turbo-charged w/ air cooled intercooler, DPD system |
| Net Power | 55.2 hp (41.2 kw) |
| Power Measured @ | 2000 rpm |
| Net Torque | 146.8 lb ft (199 Nm) |
| Bore | 3 in (76.2 mm) |
| Stroke | 4 in (101.6 mm) |
| Alternator | 50 amps |
| Oil Filter | Replaceable, full flow spin-on cartridge |
Capacities
| Swing Drive | 2.6 gal (9.7 L) |
| Fuel Tank | 32 gal (121.2 L) |
| Hydraulic Tank | 13 gal (49.3 L) |
| Cooling System | 3.3 gal (12.2 L) |
| Final Drive | 0.3 gal (1.1 L) |
| Hydraulic System | 25 gal (94.7 L) |
| Engine Oil | 3 gal (11.4 L) |
Operational
| Arm Breakout Force | 8880 lb (39.5 kN) |
| Operating Weight | 16204 lb (7350 kg) |
| Operating Voltage | 24 V |
| Drawbar Pull | 13376 lb (6067.3 kg) |
| Hydraulic System Relief Valve Pressure | 4264 psi (29399.3 kPa) |
| Hydraulic Pump Flow Capacity | 19.6 gal/min (74 L/min) |
Performance
| Lift Over End 10' Radius - Lbs (Kg) | 8000.6 lb (3629 kg) |
| Lift Over End Max. Reach | 2749.2 lb (1247 kg) |
| Lift Over Side 10' Radius | 6045.1 lb (2742 kg) |
| Lift Over Side Max. Reach | 1951.1 lb (885 kg) |
Swing Mechanism
| Swing Speed | 9.5 rpm |
Hydraulic System
| Main Pump - Maximum Flow | 39.1 gal/min (148 L/min) |
Bucket
| Breakout Force | 12791.7 lb (56.9 kN) |
Hydraulic System
| Relief Valve Pressure | 4264 psi (29399.3 kPa) |
Brakes
| Brakes Type | Mechanical disc |
| Service Brake | SAHR disc – each motor |
| Travel Control | Dual stage relief/ counter balance design |
