John Deere 410
Browse All John Deere or Loader Backhoe Models
Contents:
Backhoe
| Load Height - Std | 11.75 ft in (3580 mm) |
| Reach From Swivel - Std | 18.68 ft in (8690 mm) |
| Dig Depth - Std | 15.33 ft in (4670 mm) |
| Reach At Load Height - Std | 21.92 ft in (6680 mm) |
| Dig Depth - Ext | 14.17 ft in (4320 mm) |
| Reach At Load Height - Ext | 21.92 ft in (6680 mm) |
| Load At Max Lift - Std | 1950 lb (884 kg) |
| Bucket Dig Force - Ext | 9650 lb (3247 kg) |
| Bucket Dig Force - Std | 9650 lb (3247 kg) |
| Reach From Swivel - Ext | 18.68 ft in (8690 mm) |
| Load Height - Ext | 11.58 ft in (3530 mm) |
| Load At Max Lift - Ext | 3300 lb (1497 kg) |
Dimensions
| Transport Length | 23.75 ft in (7250 mm) |
| Transport Width | 10.17 ft in (3100 mm) |
| Transport Height | 11.75 ft in (3580 mm) |
| Height To Top Of Suspended Cab | 8.42 ft in (2560 mm) |
Loader
| Clearance At Max Dump Height | 10.75 ft in (3280 mm) |
| Reach At Max Dump Height | 2.75 ft in (838 mm) |
| Dig Depth | 4 in (102 mm) |
| Bucket Breakout Force | 7500 lb (33.62 kN) |
| Bucket Width | 89.4 in (227 mm) |
| Bucket Capacity | 1.25 yd3 (0.96 m3) |
| Lift Capacity At Full Height | 5000 lb (2268 kg) |
Engine
| Number Of Cylinders | 4 |
| Engine Make | 2240 |
| Engine Model | 300 Series |
| Gross Power | 66 hp (49.3 kw) |
| Net Power | 62 hp (46.3 kw) |
| Power Measured @ | 2500 rpm |
| Torque Measured @ | 1300 rpm |
| Net Max Torque | 160 lb ft (217 Nm) |
| Displacement | 219 cu in (3.6 L) |
Operational
| Fuel Capacity | 3.5 gal (13 L) |
| Hydraulic System Fluid Capacity | 20.5 gal (77.6 L) |
| Oil System Fluid Capacity | 2.3 gal (8.5 L) |
| Cooling System Fluid Capacity | 3.3 gal (12.3 L) |
| Transmission Fluid Capacity | 10 gal (37.8 L) |
| Turning Radius | 10.2 ft in (3100 mm) |
| Tire Size Front - 2wd / 4wd | 11L-16,10ply rating,F3/7.50/8.00-16,10ply rating,F3 |
| Rear Tires Size 2wd/4wd | 16.9-24,8ply rating,R4/19.5L-24 8ply rating,R4 |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 35 amps |
Transmission
| Transmission Type | Constant mesh, 8-speed forward and reverse.Standard hydraulic direction reverser permits no clutch reversing in all gears |
| Number Of Forward Gears | 8 |
| Number Of Reverse Gears | 8 |
| Max Speed - Forward | 16.4 mph (26.4 km/h) |
| Max Speed Reverse | 18.7 mph (30.1 km/h) |
Hydraulic
| Pump Type | Piston, constant pressure, variable displacement |
| Pump Flow Capacity | 38 gal/min (2.4 L/min) |
| Relief Valve Pressure | 2350 psi (16203 kPa) |
