John Deere 200D LC
Browse All John Deere or Hydraulic Excavator Models
Contents:
Boom/Stick Option (Hex) 1
| Shipping Length Of Unit | 31.27 ft in (9530 mm) |
| Shipping Height Of Unit | 9.68 ft in (2950 mm) |
| Max Cutting Height | 32.94 ft in (10040 mm) |
| Max Loading Height | 23.56 ft in (7180 mm) |
| Max Reach Along Ground | 31.99 ft in (9750 mm) |
| Max Vertical Wall Digging Depth | 19.66 ft in (5990 mm) |
| Max Digging Depth | 21.92 ft in (6680 mm) |
| Boom/Stick Option (Hex) 1 | 9'7" (2910mm) stick |
Boom/Stick Option (Hex) 2
| Shipping Length Of Unit | 31.5 ft in (9600 mm) |
| Max Cutting Height | 31.73 ft in (9670 mm) |
| Shipping Height Of Unit | 10.44 ft in (3180 mm) |
| Max Loading Height | 22.41 ft in (6830 mm) |
| Max Reach Along Ground | 30.35 ft in (9250 mm) |
| Max Vertical Wall Digging Depth | 17.39 ft in (5300 mm) |
| Max Digging Depth | 20.28 ft in (6180 mm) |
| Boom/Stick Option (Hex) 2 | 7'11" (2420mm) stick |
Dimensions
| Ground Clearance | 1.48 ft in (450 mm) |
| Height To Top Of Cab | 9.68 ft in (2950 mm) |
| Width To Outside Of Tracks | 10.47 ft in (3190 mm) |
| Length Of Track On Ground | 12.05 ft in (3670 mm) |
| Tail Swing Radius | 9.03 ft in (2750 mm) |
| Removal Counterweight Clearance | 3.39 ft in (1031 mm) |
Undercarriage
| Track Gauge | 7.83 ft in (2390 mm) |
| Shoe Size | 31.5 in (800 mm) |
| Number Of Shoes Per Side | 49 |
| Drawbar Pull | 45620 lb (202.93 kN) |
| Number Of Track Rollers Per Side | 8 |
| Number Of Carrier Rollers Per Side | 2 |
| Max Travel Speed | 3.42 mph (5.5 km/h) |
| Ground Pressure | 5.3 psi (36.55 kPa) |
Engine
| Number Of Cylinders | 6 |
| Engine Make | 2240 |
| Engine Model | 6068H |
| Net Power | 159 hp (118.6 kw) |
| Power Measured @ | 2000 rpm |
| Displacement | 414 cu in (6.8 L) |
| Aspiration | Turbocharged air to air charge cooler |
Operational
| Operating Weight | 49985.5 lb (22673 kg) |
| Fuel Capacity | 105.7 gal (400 L) |
| Cooling System Fluid Capacity | 6.9 gal (26.1 L) |
| Hydraulic System Fluid Capacity | 63.5 gal (240 L) |
| Engine Oil Capacity | 6.1 gal (23 L) |
| Operating Voltage | 24 V |
| Swing Drive Fluid Capacity | 1.7 gal (6.2 L) |
| Alternator Supplied Amperage | 80 amps |
| Hydraulic System Relief Valve Pressure | 4980 psi (34335.9 kPa) |
| Hydraulic Pump Flow Capacity | 112.1 gal/min (424 L/min) |
Swing Mechanism
| Swing Torque | 50662 lb ft (68688.5 Nm) |
| Swing Speed | 13.3 rpm |
Buckets
| Reference Bucket Capacity | 1.2 yd3 (1 m3) |
| Minimum Bucket Capacity | 0.8 yd3 (0.6 m3) |
| Maximum Bucket Capacity | 1.5 yd3 (1.1 m3) |
